in bconsole i do this....
*umount
The defined Storage resources are:
1: File
2: MSL6000
Select Storage resource (1-2): 2
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3002 Device "Drive-0" (/dev/nst0) unmounted.
why ask by dirver loaded???????
*mount slot=2
The defined Storage resources are:
1: File
2: MSL6000
Select Storage resource (1-2): 2
3001 Mounted Volume: VA0208L3
3001 Device "Drive-0" (/dev/nst0) is mounted with Volume "VA0208L3"
i don't know why always mount VA208L3
*umount
The defined Storage resources are:
1: File
2: MSL6000
Select Storage resource (1-2): 2
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3002 Device "Drive-0" (/dev/nst0) unmounted.
once again the message...
*mount
The defined Storage resources are:
1: File
2: MSL6000
Select Storage resource (1-2): 2
3001 Mounted Volume: VA0208L3
3001 Device "Drive-0" (/dev/nst0) is mounted with Volume "VA0208L3"
*umount
The defined Storage resources are:
1: File
2: MSL6000
Select Storage resource (1-2): 2
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3002 Device "Drive-0" (/dev/nst0) unmounted.
*list media
Pool: Scratch
No results to list.
Pool: TapeLibrary
+---------+------------+-----------+---------+-------------------+----------+--------------+---------+------+-----------+--------------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten |
+---------+------------+-----------+---------+-------------------+----------+--------------+---------+------+-----------+--------------+---------------------+
| 34 | VA0185L3 | Full | 1 | 1,126,588,603,392 | 1,562 | 15,552,000 | 1 | 1 | 1 | LTO3-Ultrium | 2012-03-30 02:45:40 |
| 36 | VA0186L3 | Used | 1 | 1 | 0 | 15,552,000 | 1 | 2 | 1 | LTO3-Ultrium | 2012-03-04 10:23:17 |
| 37 | VA0187L3 | Full | 1 | 972,669,551,616 | 1,209 | 15,552,000 | 1 | 3 | 1 | LTO3-Ultrium | 2012-04-05 04:00:33 |
| 39 | VA0188L3 | Full | 1 | 1,079,748,052,992 | 1,518 | 15,552,000 | 1 | 4 | 1 | LTO3-Ultrium | 2012-03-17 03:25:22 |
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3002 Device "Drive-0" (/dev/nst0) unmounted.
*mount slot=2
The defined Storage resources are:
1: File
2: MSL6000
Select Storage resource (1-2): 2
3001 Mounted Volume: VA0208L3
3001 Device "Drive-0" (/dev/nst0) is mounted with Volume "VA0208L3"
*status storage=2
Storage resource "2": not found
The defined Storage resources are:
1: File
2: MSL6000
Select Storage resource (1-2): 2
bacula-sd Version: 5.0.2 (28 April 2010) i486-pc-linux-gnu debian squeeze/sid
Daemon started 06-Sep-12 16:36, 995 Jobs run since started.
Heap: heap=667,648 smbytes=475,731 max_bytes=574,376 bufs=95 max_bufs=114
Sizes: boffset_t=8 size_t=4 int32_t=4 int64_t=8
Running Jobs:
No Jobs running.
====
Jobs waiting to reserve a drive:
====
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
===================================================================
57004 Incr 0 0 Error 24-Sep-12 04:56 Backup_Redes
57005 Incr 0 0 Error 24-Sep-12 04:56 Backup_Romay
57006 Incr 0 0 Error 24-Sep-12 04:56 Backup_Simoni
57007 Incr 0 0 Error 24-Sep-12 05:00 Backup_SmtpProxy1
57008 Incr 0 0 Error 24-Sep-12 05:00 Backup_SmtpProxy2
57009 Incr 0 0 Error 24-Sep-12 05:00 Backup_vListas
57010 Incr 0 0 Error 24-Sep-12 05:00 Backup_Vs01
57011 Incr 0 0 Error 24-Sep-12 05:11 Backup_Web4
57012 Incr 0 0 Error 24-Sep-12 05:11 Backup_XYMAwww
57013 Incr 0 0 Error 24-Sep-12 05:12 Backup_Zabbix
====
Device status:
Autochanger "Autochanger" with devices:
"Drive-0" (/dev/nst0)
Device "Drive-0" (/dev/nst0) is mounted with:
Volume: VA0208L3
Pool: *unknown* (why unkow the pool if is TapeLibrary )
Media type: LTO3-Ultrium
Drive 0 status unknown.
Total Bytes Read=709,632 Blocks Read=11 Bytes/block=64,512
Positioned at File=0 Block=0
Device "FileStorage" is not open or does not exist.
====
Used Volume status:
VA0208L3 on device "Drive-0" (/dev/nst0)
Reader=0 writers=0 devres=0 volinuse=0
====
====
* even i mount the tapelibrary, the job in the tape can't do it. always got same error about issue drive loaded
any idea? have backup stopped many days... just running with hdd storage... :S