On Wed, Apr 25, 2012 at 08:08:43PM +0200, Jesper Krogh wrote:
> Allthough related, this is not a bacula issue. Trying to get
> Bacula working with an Overland Neo8000e changer I have
> got mtx status/load/unload to work and "mt" reports
> the tapes as excected. The Changer is connected using SAS.
I am in progress of installing Bacula on some host with Neo4000e
attached. The load times are similar to the ones of e.g. Quantum
SuperLoader3.
> But the time it takes for status/load/unload is about 2 minutes per action
> where 1 minute and 45 seconds goes by doing "nothing at all".
2 Minutes sound reasonable, you can see stuff moving through the front
window. What do you mean by 'nothing at all': just from the software
point of view, or if you look inside the hardware (if that is possible
with the 8000e)?
However, mtx, Bacula and the library itself have quite different
opinions on which way to number the slots. No big deal mostly but for
the 'mail magazine'. I have not yet further investigated this.
Regards,
Adrian
--
LiHAS - Adrian Reyer - Hessenwiesenstraße 10 - D-70565 Stuttgart
Fon: +49 (7 11) 78 28 50 90 - Fax: +49 (7 11) 78 28 50 91
Mail: lihas AT lihas DOT de - Web: http://lihas.de
Linux, Netzwerke, Consulting & Support - USt-ID: DE 227 816 626 Stuttgart
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
