I recently change the set of tapes for the month and for some reason i am getting errors when backing up data since bacula keeps asking about a tape that was previously used. How can i get bacula to use the new set? i've done the updata slots and label barcode, etc and nothing seems to be working. Here is the message i get:
05-Oct 10:53 housigma25-sd JobId 118: Invalid slot=0 defined in catalog for Volume "CNH895" on "DLTv4" (/dev/nst0). Manual load may be required.
05-Oct 10:53 housigma25-sd JobId 118: 3301 Issuing autochanger "loaded? drive 0" command.
05-Oct 10:53 housigma25-sd JobId 118: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
05-Oct 10:53 housigma25-sd JobId 118: 3301 Issuing autochanger "loaded? drive 0" command.
05-Oct 10:53 housigma25-sd JobId 118: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
05-Oct 10:53 housigma25-sd JobId 118: Warning: mount.c:221 Open device "DLTv4" (/dev/nst0) Volume "CNH895" failed: ERR=dev.c:491 Unable to open device "DLTv4" (/dev/nst0): ERR=No medium found
CNH895 is no longer in the loader since it was used last month..
Any ideas..?
Thanks
------
Romer Ventura