Bacula-users

Re: [Bacula-users] Network error reading from FD

2010-06-18 12:50:18
Subject: Re: [Bacula-users] Network error reading from FD
From: Derek Harkness <dharknes AT umich DOT edu>
To: Dietz Pröpper <dietz AT rotfl.franken DOT de>
Date: Fri, 18 Jun 2010 12:46:40 -0400
Yep slow drives and lots of data 5.5TB and I'm only getting 5-10MB/s

Derek

On Jun 18, 2010, at 4:49, Dietz Pröpper <dietz AT rotfl.franken DOT de> wrote:

> Derek Harkness:
>> I'm getting the following error between one of my clients and the
>> storage server.  All my other clients have been able to backup just
>> fine to this storage device but this one client always returns the
>> Connection reset by peer.
>> 
>> I've adjusted the heartbeat and the keepalive setting on the client . 
>> The client and storage are on the same ethernet switch so no routers,
>> firewalls, or other network devices.
> 
> Hmm, heartbeat and keepalive should not influence connection resets (at 
> least if your fd is still sending data).
> First thing I notice - your backup is really running for over 35h?
> 
> regards,
>    Dietz
> 
> ------------------------------------------------------------------------------
> ThinkGeek and WIRED's GeekDad team up for the Ultimate 
> GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
> lucky parental unit.  See the prize list and enter to win: 
> http://p.sf.net/sfu/thinkgeek-promo
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
> 
> 

------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate 
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the 
lucky parental unit.  See the prize list and enter to win: 
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
<Prev in Thread] Current Thread [Next in Thread>