Hello,
I am trying to configure bacula to use vchanger for offsite backups. Basically I'd like to be able to swap USB drives every week and take them offsite. The vchanger howto does not state whether I should run label barcodes for each magazine. Could someone please clarify what operations should be performed to configure two drives?
bacula-dir.conf relevant config: Storage { Name = OffSiteChanger Address = mfile.merus.local-sd Password = "snip" Device = OffSiteChanger
Media Type = File Autochanger = yes; }
bacula-sd.conf relevant config:
Autochanger { Name = OffSiteChanger Device = OffSiteChanger-drive-0
Device = OffSiteChanger-drive-1 Changer Command = "/usr/local/bin/vchanger %c %o %S %a %d" Changer Device = "/etc/bacula/removable.conf" } #--- drive 0 of the OffSiteChanger autochanger
Device { Name = OffSiteChanger-drive-0 DriveIndex = 0 Autochanger = yes; DeviceType = File MediaType = File ArchiveDevice = /var/lib/bacula/OffSiteChanger/0/drive0
RemovableMedia = no; RandomAccess = yes; } #--- drive 1 of the OffSiteChanger autochanger Device { Name = OffSiteChanger-drive-1 DriveIndex = 1
Autochanger = yes; DeviceType = File MediaType = File ArchiveDevice = /var/lib/bacula/OffSiteChanger/1/drive1 RemovableMedia = no; RandomAccess = yes;
}# ...
vchanger config:
changer_name = "OffSiteChanger" work_dir = "/var/lib/bacula/OffSiteChanger" logfile = "/var/lib/bacula/OffSiteChanger/OffSiteChanger.log"
Virtual_Drives = 1 slots_per_magazine = 4 magazine_bays = 1 automount_dir = /opt/bacula/removable magazine = "UUID:1125820e-3163-41d0-b571-36818eea5a78" magazine = "UUID:8a672f1d-9f79-4b68-8260-8285eeb6a1d8"
With this configuration when I unplug one drive, plug in the second drive, and run update slots bacula says this:
*update slots Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog" The defined Storage resources are: 1: File 2: Archive 3: OffSiteChanger Select Storage resource (1-3): 3
Enter autochanger drive[0]: 1 Connecting to Storage daemon OffSiteChanger at mfile.merus.local-sd:9103 ... 3306 Issuing autochanger "slots" command. Device "OffSiteChanger" has 4 slots.
Connecting to Storage daemon OffSiteChanger at mfile.merus.local-sd:9103 ... 3306 Issuing autochanger "list" command. Volume "OffSiteChanger_0002_0001" not found in catalog. Slot=1 InChanger set to zero.
Volume "OffSiteChanger_0002_0002" not found in catalog. Slot=2 InChanger set to zero. Volume "OffSiteChanger_0002_0003" not found in catalog. Slot=3 InChanger set to zero. Volume "OffSiteChanger_0002_0004" not found in catalog. Slot=4 InChanger set to zero.
*
I expected it to link the volumes to the new slots. What am I doing wrong?
Thanks, Greg
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|