Just an update: VSS is backing up everything needed. I am still in the
same position as I was before. When I go to estimate the job it comes
up with plugin: "exchange (some other stuff)" not found.
Does anyone have any ideas?
Thanks,
Greg
On Tue, Mar 9, 2010 at 2:39 PM, Gregory Durham <gregory.durham AT gmail DOT
com> wrote:
> Thank you very much for replying.
> My E: drive is a LUN handed to exchange from my SAN, it contains the
> exchange databases.
> My F: drive is another LUN and it contains the logs from exchange. I
> will try to change the plugin line and see what happens.
>
> I will look in to what VSS is actually backing up as well.
>
> Thanks,
> Greg
>
> On Tue, Mar 9, 2010 at 2:34 PM, James Harper
> <james.harper AT bendigoit.com DOT au> wrote:
>>>
>>> Does anyone have any ideas?
>>>
>>
>> It could be something to do with Exchange 2007 having multiple storage
>> groups. My Exchange 2007 test server broke and I haven't had time to fix it
>> just lately. I have definitely tested it with two storage groups under 2003
>> but it could still be a regression...
>>
>> I think this has been tried before by someone else but can you please change
>> your plugin line to:
>>
>> Plugin = "exchange:/@EXCHANGE/Microsoft Information Store/First Storage
>> Group"
>>
>> That isn't a fix, but if it works it should help me figure out where the
>> problem lies.
>>
>> Also, is any of Exchange on disks other than E: and F:? There may be some
>> interaction between VSS and Exchange backup that could be getting upset if
>> all the disks that hold exchange databases aren't included in the VSS set.
>>
>> James
>>
>>> On Fri, Mar 5, 2010 at 7:31 AM, Gregory Durham <gregory.durham AT gmail DOT
>>> com>
>>> wrote:
>>> > Sorry if this is a repost I did not reply to the actual group...
>>> >
>>> > 1)For the mailbox store there are two stores and they are 4gb in total
>>> >
>>> > 2)All the log i see is:
>>> >
>>> > The VSS service is shutting down due to idle timeout.
>>> >
>>> > and this is 3 mins after the backup errors out.
>>> >
>>> > 3)Defiantly using the 64bit file daemon.
>>> >
>>> > On Thu, Mar 4, 2010 at 4:53 PM, James Harper <james.harper AT
>>> > bendigoit.com DOT au>
>>> > wrote:
>>> >>
>>> >> There have been a few reports of problems on 2007 but I've been unable
>>> >> to replicate them. The reports are somewhat different to yours though.
>>> >> Here's some questions...
>>> >>
>>> >> Can you tell me how big your mailbox store is?
>>> >>
>>> >> Are there any messages in the windows event log that might be relevant?
>>> >>
>>> >> Are you definitely running the 64 bit version of bacula?
>>> >>
>>> >> Thanks
>>> >>
>>> >> James
>>> >>
>>> >> > -----Original Message-----
>>> >> > From: Gregory Durham [mailto:gregory.durham AT gmail DOT com]
>>> >> > Sent: Friday, 5 March 2010 11:50
>>> >> > To: James Harper
>>> >> > Cc: bacula-users AT lists.sourceforge DOT net
>>> >> > Subject: Re: [Bacula-users] Bacula Exchange plugin question
>>> >> >
>>> >> > Thanks for replying and it is Server 2008 x64 and Exchange 2007. I
>>> >> completely
>>> >> > forgot to mention it.
>>> >> >
>>> >> > Thanks,
>>> >> > Greg
>>> >> >
>>> >> >
>>> >> > On Thu, Mar 4, 2010 at 4:40 PM, James Harper
>>> >> <james.harper AT bendigoit.com DOT au>
>>> >> > wrote:
>>> >> >
>>> >> >
>>> >> > Exchange 2003 or 2007? (or 2010?)
>>> >> >
>>> >> > James
>>> >> >
>>> >> >
>>> >> > > -----Original Message-----
>>> >> > > From: Gregory Durham [mailto:gregory.durham AT gmail DOT com]
>>> >> > > Sent: Friday, 5 March 2010 04:02
>>> >> > > To: bacula-users AT lists.sourceforge DOT net
>>> >> > > Subject: [Bacula-users] Bacula Exchange plugin question
>>> >> > >
>>> >> > > Hello all,
>>> >> > > I am having a problem with bacula backing up exchange server.
>>> >> The
>>> >> > error logs
>>> >> > > are at the bottom. I just upgraded to version 5.0.1 as I was
>>> >> having a
>>> >> > similar
>>> >> > > issue on 3.0.3.
>>> >> > >
>>> >> > > My configuration on the server is as follows:
>>> >> > >
>>> >> > > JobDefs {
>>> >> > > Name = "ExchangeJob"
>>> >> > > Type = Backup
>>> >> > > Level = Full
>>> >> > > Schedule = "DailyCycleMultipleTimes"
>>> >> > > Storage = "priTape"
>>> >> > > Messages = Standard
>>> >> > > Pool = MondayPool
>>> >> > > Priority = 5
>>> >> > > }
>>> >> > >
>>> >> > > Storage {
>>> >> > > Name = "priTape"
>>> >> > > Address = San02.example.com
>>> >> > > Device = "bigTape"
>>> >> > > Media Type = Tape
>>> >> > > Password = ""
>>> >> > > }
>>> >> > >
>>> >> > > FileSet {
>>> >> > > Name = "exchangeBackup"
>>> >> > > Include {
>>> >> > > options {sparse = yes}
>>> >> > > File = "E:/"
>>> >> > > File = "F:/"
>>> >> > > Plugin = "exchange:/@EXCHANGE/Microsoft
>>> >> Information
>>> >> > Store"
>>> >> > > }
>>> >> > > Exclude {
>>> >> > > File = "E:/MAILBOX/e00.chk"
>>> >> > > File = "E:/MAILBOX/Mailbox Database.edb"
>>> >> > > File = "E:/MAILBOX/tmp.edb"
>>> >> > > File = "E:/PUBLIC FOLDERS/e01.chk"
>>> >> > > File = "E:/PUBLIC FOLDERS/Public Folder
>>> >> Database.edb"
>>> >> > > File = "E:/PUBLIC FOLDERS/tmp.edb"
>>> >> > > File = "E:/EXECUTIVE MB/E02.chk"
>>> >> > > File = "E:/EXECUTIVE MB/Executive Mailbox.edb"
>>> >> > > File = "E:/EXECUTIVE MB/tmp.edb"
>>> >> > > }
>>> >> > > }
>>> >> > >
>>> >> > > Job {
>>> >> > > Name ="exchangeBK"
>>> >> > > JobDefs = "ExchangeJob"
>>> >> > > FileSet = "exchangeBackup"
>>> >> > > Client = "exchange-fd"
>>> >> > > Messages = Standard
>>> >> > > RunBeforeJob = "/opt/bacula/etc/resetTape.sh"
>>> >> > > }
>>> >> > >
>>> >> > > Schedule {
>>> >> > > Name = "DailyCycleMultipleTimes"
>>> >> > > Run = Full POOL=MondayPool Monday at 18:00
>>> >> > > Run = Full POOL=TuesdayPool Tuesday at 18:00
>>> >> > > Run = Full POOL=WednesdayPool Wednesday at 18:00
>>> >> > > Run = Full POOL=ThursdayPool Thursday at 18:00
>>> >> > > Run = Full POOL=FridayPool Friday at 18:00
>>> >> > > }
>>> >> > >
>>> >> > > Client {
>>> >> > > Name = exchange-fd
>>> >> > > Address = exchange.example.com
>>> >> > > FDPort = 9102
>>> >> > > Catalog = MyCatalog
>>> >> > > Heartbeat Interval = 60
>>> >> > > Password = "" # password for FileDaemon
>>> >> > > File Retention = 30 days # 30 days
>>> >> > > Job Retention = 6 months # six months
>>> >> > > AutoPrune = yes # Prune expired
>>> >> Jobs/Files
>>> >> > > }
>>> >> > >
>>> >> > > Here is a pool, there are 5 of them (one for each day of the
>>> >> week.
>>> >> > >
>>> >> > > Pool {
>>> >> > > Name = MondayPool
>>> >> > > Pool Type = Backup
>>> >> > > Recycle = yes # Bacula can
>>> >> automatically
>>> >> > recycle
>>> >> > > Volumes
>>> >> > > AutoPrune = yes # Prune expired volumes
>>> >> > > Volume Use Duration = 16 hours
>>> >> > > Volume Retention = 13 days # two weeks
>>> >> > > Label Format = "${Pool}-${Day}-${Month}-${Year}"
>>> >> > > }
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > > 04-Mar 08:24 san02-dir JobId 7: shell command: run BeforeJob
>>> >> > > "/opt/bacula/etc/resetTape.sh"
>>> >> > > 04-Mar 08:25 san02-dir JobId 7: Start Backup JobId 7,
>>> >> > Job=exchangeBK.2010-03-
>>> >> > > 04_08.24.23_03
>>> >> > > 04-Mar 08:25 san02-dir JobId 7: Created new Volume
>>> >> > "MondayPool-4-3-2010" in
>>> >> > > catalog.
>>> >> > > 04-Mar 08:25 san02-dir JobId 7: Using Device "bigTape"
>>> >> > > 04-Mar 08:25 san02-sd JobId 7: Labeled new Volume
>>> >> > "MondayPool-4-3-2010" on
>>> >> > > device "bigTape" (/dev/rmt/0mbn).
>>> >> > > 04-Mar 08:25 san02-sd JobId 7: Wrote label to prelabeled
>>> >> Volume
>>> >> > "MondayPool-4-
>>> >> > > 3-2010" on device "bigTape" (/dev/rmt/0mbn)
>>> >> > > 04-Mar 08:25 exchange-fd JobId 7: Generate VSS snapshots.
>>> >> Driver="VSS
>>> >> > Vista",
>>> >> > > Drive(s)="EF"
>>> >> > > 04-Mar 08:30 san02-sd JobId 7: Fatal error: append.c:156 Error
>>> >> reading
>>> >> > data
>>> >> > > header from FD. ERR=No data available
>>> >> > > 04-Mar 08:30 san02-sd JobId 7: Job write elapsed time =
>>> >> 00:04:51,
>>> >> > Transfer
>>> >> > > rate = 22.92 M Bytes/second
>>> >> > > 04-Mar 08:30 san02-sd JobId 7: Fatal error: bsock.c:488 Packet
>>> >> size
>>> >> > too big
>>> >> > > from "client:10.0.0.206:36643. Terminating connection.
>>> >> > > 04-Mar 08:30 exchange-fd JobId 7: Fatal error:
>>> >> > > /home/kern/bacula/k/bacula/src/filed/backup.c:1019 Network
>>> >> send error
>>> >> > to SD.
>>> >> > > ERR=Input/output error
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> "ASR
>>> >> > Writer",
>>> >> > > State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> "System
>>> >> > > Writer", State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> "IIS
>>> >> > Config
>>> >> > > Writer", State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> "WMI
>>> >> > Writer",
>>> >> > > State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> "BITS
>>> >> > Writer",
>>> >> > > State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> "IIS
>>> >> > Metabase
>>> >> > > Writer", State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> "COM+
>>> >> > REGDB
>>> >> > > Writer", State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> "Shadow
>>> >> > Copy
>>> >> > > Optimization Writer", State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> > "Registry
>>> >> > > Writer", State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>>> >> > "Microsoft
>>> >> > > Exchange Writer", State: 0x1 (VSS_WS_STABLE)
>>> >> > > 04-Mar 08:32 san02-dir JobId 7: Error: Bacula san02-dir 5.0.1
>>> >> > (24Feb10): 04-
>>> >> > > Mar-2010 08:32:18
>>> >> > > Build OS: i386-pc-solaris2.11 solaris 5.11
>>> >> > > JobId: 7
>>> >> > > Job: exchangeBK.2010-03-04_08.24.23_03
>>> >> > > Backup Level: Full
>>> >> > > Client: "exchange-fd" 5.0.0 (24Jan10)
>>> >> Linux,Cross-
>>> >> > > compile,Win64
>>> >> > > FileSet: "exchangeBackup" 2010-03-02 18:00:00
>>> >> > > Pool: "MondayPool" (From Job resource)
>>> >> > > Catalog: "MyCatalog" (From Client resource)
>>> >> > > Storage: "priTape" (From Job resource)
>>> >> > > Scheduled time: 04-Mar-2010 08:24:19
>>> >> > > Start time: 04-Mar-2010 08:25:09
>>> >> > > End time: 04-Mar-2010 08:32:18
>>> >> > > Elapsed time: 7 mins 9 secs
>>> >> > > Priority: 5
>>> >> > > FD Files Written: 415
>>> >> > > SD Files Written: 415
>>> >> > > FD Bytes Written: 6,671,943,952 (6.671 GB)
>>> >> > > SD Bytes Written: 6,671,751,219 (6.671 GB)
>>> >> > > Rate: 15552.3 KB/s
>>> >> > > Software Compression: None
>>> >> > > VSS: yes
>>> >> > > Encryption: no
>>> >> > > Accurate: no
>>> >> > > Volume name(s): MondayPool-4-3-2010
>>> >> > > Volume Session Id: 1
>>> >> > > Volume Session Time: 1267719836
>>> >> > > Last Volume Bytes: 6,676,733,952 (6.676 GB)
>>> >> > > Non-fatal FD errors: 0
>>> >> > > SD Errors: 0
>>> >> > > FD termination status: Error
>>> >> > > SD termination status: Error
>>> >> > > Termination: *** Backup Error ***
>>> >> > >
>>> >> > >
>>> >> > > Thanks to anyone who has any ideas.
>>> >> > >
>>> >> > > Thanks,
>>> >> > > Greg
>>> >> > >
>>> >> >
>>> >> >
>>> >> >
>>> >>
>>> >
>>> >
>>>
>>> ------------------------------------------------------------------------------
>>> Download Intel® Parallel Studio Eval
>>> Try the new software tools for yourself. Speed compiling, find bugs
>>> proactively, and fine-tune applications for parallel performance.
>>> See why Intel Parallel Studio got high marks during beta.
>>> http://p.sf.net/sfu/intel-sw-dev
>>> _______________________________________________
>>> Bacula-users mailing list
>>> Bacula-users AT lists.sourceforge DOT net
>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|