Does anyone have any ideas?
On Fri, Mar 5, 2010 at 7:31 AM, Gregory Durham <gregory.durham AT gmail DOT
com> wrote:
> Sorry if this is a repost I did not reply to the actual group...
>
> 1)For the mailbox store there are two stores and they are 4gb in total
>
> 2)All the log i see is:
>
> The VSS service is shutting down due to idle timeout.
>
> and this is 3 mins after the backup errors out.
>
> 3)Defiantly using the 64bit file daemon.
>
> On Thu, Mar 4, 2010 at 4:53 PM, James Harper <james.harper AT bendigoit.com
> DOT au>
> wrote:
>>
>> There have been a few reports of problems on 2007 but I've been unable
>> to replicate them. The reports are somewhat different to yours though.
>> Here's some questions...
>>
>> Can you tell me how big your mailbox store is?
>>
>> Are there any messages in the windows event log that might be relevant?
>>
>> Are you definitely running the 64 bit version of bacula?
>>
>> Thanks
>>
>> James
>>
>> > -----Original Message-----
>> > From: Gregory Durham [mailto:gregory.durham AT gmail DOT com]
>> > Sent: Friday, 5 March 2010 11:50
>> > To: James Harper
>> > Cc: bacula-users AT lists.sourceforge DOT net
>> > Subject: Re: [Bacula-users] Bacula Exchange plugin question
>> >
>> > Thanks for replying and it is Server 2008 x64 and Exchange 2007. I
>> completely
>> > forgot to mention it.
>> >
>> > Thanks,
>> > Greg
>> >
>> >
>> > On Thu, Mar 4, 2010 at 4:40 PM, James Harper
>> <james.harper AT bendigoit.com DOT au>
>> > wrote:
>> >
>> >
>> > Exchange 2003 or 2007? (or 2010?)
>> >
>> > James
>> >
>> >
>> > > -----Original Message-----
>> > > From: Gregory Durham [mailto:gregory.durham AT gmail DOT com]
>> > > Sent: Friday, 5 March 2010 04:02
>> > > To: bacula-users AT lists.sourceforge DOT net
>> > > Subject: [Bacula-users] Bacula Exchange plugin question
>> > >
>> > > Hello all,
>> > > I am having a problem with bacula backing up exchange server.
>> The
>> > error logs
>> > > are at the bottom. I just upgraded to version 5.0.1 as I was
>> having a
>> > similar
>> > > issue on 3.0.3.
>> > >
>> > > My configuration on the server is as follows:
>> > >
>> > > JobDefs {
>> > > Name = "ExchangeJob"
>> > > Type = Backup
>> > > Level = Full
>> > > Schedule = "DailyCycleMultipleTimes"
>> > > Storage = "priTape"
>> > > Messages = Standard
>> > > Pool = MondayPool
>> > > Priority = 5
>> > > }
>> > >
>> > > Storage {
>> > > Name = "priTape"
>> > > Address = San02.example.com
>> > > Device = "bigTape"
>> > > Media Type = Tape
>> > > Password = ""
>> > > }
>> > >
>> > > FileSet {
>> > > Name = "exchangeBackup"
>> > > Include {
>> > > options {sparse = yes}
>> > > File = "E:/"
>> > > File = "F:/"
>> > > Plugin = "exchange:/@EXCHANGE/Microsoft
>> Information
>> > Store"
>> > > }
>> > > Exclude {
>> > > File = "E:/MAILBOX/e00.chk"
>> > > File = "E:/MAILBOX/Mailbox Database.edb"
>> > > File = "E:/MAILBOX/tmp.edb"
>> > > File = "E:/PUBLIC FOLDERS/e01.chk"
>> > > File = "E:/PUBLIC FOLDERS/Public Folder
>> Database.edb"
>> > > File = "E:/PUBLIC FOLDERS/tmp.edb"
>> > > File = "E:/EXECUTIVE MB/E02.chk"
>> > > File = "E:/EXECUTIVE MB/Executive Mailbox.edb"
>> > > File = "E:/EXECUTIVE MB/tmp.edb"
>> > > }
>> > > }
>> > >
>> > > Job {
>> > > Name ="exchangeBK"
>> > > JobDefs = "ExchangeJob"
>> > > FileSet = "exchangeBackup"
>> > > Client = "exchange-fd"
>> > > Messages = Standard
>> > > RunBeforeJob = "/opt/bacula/etc/resetTape.sh"
>> > > }
>> > >
>> > > Schedule {
>> > > Name = "DailyCycleMultipleTimes"
>> > > Run = Full POOL=MondayPool Monday at 18:00
>> > > Run = Full POOL=TuesdayPool Tuesday at 18:00
>> > > Run = Full POOL=WednesdayPool Wednesday at 18:00
>> > > Run = Full POOL=ThursdayPool Thursday at 18:00
>> > > Run = Full POOL=FridayPool Friday at 18:00
>> > > }
>> > >
>> > > Client {
>> > > Name = exchange-fd
>> > > Address = exchange.example.com
>> > > FDPort = 9102
>> > > Catalog = MyCatalog
>> > > Heartbeat Interval = 60
>> > > Password = "" # password for FileDaemon
>> > > File Retention = 30 days # 30 days
>> > > Job Retention = 6 months # six months
>> > > AutoPrune = yes # Prune expired
>> Jobs/Files
>> > > }
>> > >
>> > > Here is a pool, there are 5 of them (one for each day of the
>> week.
>> > >
>> > > Pool {
>> > > Name = MondayPool
>> > > Pool Type = Backup
>> > > Recycle = yes # Bacula can
>> automatically
>> > recycle
>> > > Volumes
>> > > AutoPrune = yes # Prune expired volumes
>> > > Volume Use Duration = 16 hours
>> > > Volume Retention = 13 days # two weeks
>> > > Label Format = "${Pool}-${Day}-${Month}-${Year}"
>> > > }
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > 04-Mar 08:24 san02-dir JobId 7: shell command: run BeforeJob
>> > > "/opt/bacula/etc/resetTape.sh"
>> > > 04-Mar 08:25 san02-dir JobId 7: Start Backup JobId 7,
>> > Job=exchangeBK.2010-03-
>> > > 04_08.24.23_03
>> > > 04-Mar 08:25 san02-dir JobId 7: Created new Volume
>> > "MondayPool-4-3-2010" in
>> > > catalog.
>> > > 04-Mar 08:25 san02-dir JobId 7: Using Device "bigTape"
>> > > 04-Mar 08:25 san02-sd JobId 7: Labeled new Volume
>> > "MondayPool-4-3-2010" on
>> > > device "bigTape" (/dev/rmt/0mbn).
>> > > 04-Mar 08:25 san02-sd JobId 7: Wrote label to prelabeled
>> Volume
>> > "MondayPool-4-
>> > > 3-2010" on device "bigTape" (/dev/rmt/0mbn)
>> > > 04-Mar 08:25 exchange-fd JobId 7: Generate VSS snapshots.
>> Driver="VSS
>> > Vista",
>> > > Drive(s)="EF"
>> > > 04-Mar 08:30 san02-sd JobId 7: Fatal error: append.c:156 Error
>> reading
>> > data
>> > > header from FD. ERR=No data available
>> > > 04-Mar 08:30 san02-sd JobId 7: Job write elapsed time =
>> 00:04:51,
>> > Transfer
>> > > rate = 22.92 M Bytes/second
>> > > 04-Mar 08:30 san02-sd JobId 7: Fatal error: bsock.c:488 Packet
>> size
>> > too big
>> > > from "client:10.0.0.206:36643. Terminating connection.
>> > > 04-Mar 08:30 exchange-fd JobId 7: Fatal error:
>> > > /home/kern/bacula/k/bacula/src/filed/backup.c:1019 Network
>> send error
>> > to SD.
>> > > ERR=Input/output error
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> "ASR
>> > Writer",
>> > > State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> "System
>> > > Writer", State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> "IIS
>> > Config
>> > > Writer", State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> "WMI
>> > Writer",
>> > > State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> "BITS
>> > Writer",
>> > > State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> "IIS
>> > Metabase
>> > > Writer", State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> "COM+
>> > REGDB
>> > > Writer", State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> "Shadow
>> > Copy
>> > > Optimization Writer", State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> > "Registry
>> > > Writer", State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>> > "Microsoft
>> > > Exchange Writer", State: 0x1 (VSS_WS_STABLE)
>> > > 04-Mar 08:32 san02-dir JobId 7: Error: Bacula san02-dir 5.0.1
>> > (24Feb10): 04-
>> > > Mar-2010 08:32:18
>> > > Build OS: i386-pc-solaris2.11 solaris 5.11
>> > > JobId: 7
>> > > Job: exchangeBK.2010-03-04_08.24.23_03
>> > > Backup Level: Full
>> > > Client: "exchange-fd" 5.0.0 (24Jan10)
>> Linux,Cross-
>> > > compile,Win64
>> > > FileSet: "exchangeBackup" 2010-03-02 18:00:00
>> > > Pool: "MondayPool" (From Job resource)
>> > > Catalog: "MyCatalog" (From Client resource)
>> > > Storage: "priTape" (From Job resource)
>> > > Scheduled time: 04-Mar-2010 08:24:19
>> > > Start time: 04-Mar-2010 08:25:09
>> > > End time: 04-Mar-2010 08:32:18
>> > > Elapsed time: 7 mins 9 secs
>> > > Priority: 5
>> > > FD Files Written: 415
>> > > SD Files Written: 415
>> > > FD Bytes Written: 6,671,943,952 (6.671 GB)
>> > > SD Bytes Written: 6,671,751,219 (6.671 GB)
>> > > Rate: 15552.3 KB/s
>> > > Software Compression: None
>> > > VSS: yes
>> > > Encryption: no
>> > > Accurate: no
>> > > Volume name(s): MondayPool-4-3-2010
>> > > Volume Session Id: 1
>> > > Volume Session Time: 1267719836
>> > > Last Volume Bytes: 6,676,733,952 (6.676 GB)
>> > > Non-fatal FD errors: 0
>> > > SD Errors: 0
>> > > FD termination status: Error
>> > > SD termination status: Error
>> > > Termination: *** Backup Error ***
>> > >
>> > >
>> > > Thanks to anyone who has any ideas.
>> > >
>> > > Thanks,
>> > > Greg
>> > >
>> >
>> >
>> >
>>
>
>
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|