Bacula-users

Re: [Bacula-users] Bacula Exchange plugin question

2010-03-05 10:33:46
Subject: Re: [Bacula-users] Bacula Exchange plugin question
From: Gregory Durham <gregory.durham AT gmail DOT com>
To: James Harper <james.harper AT bendigoit.com DOT au>
Date: Fri, 5 Mar 2010 07:31:08 -0800
Sorry if this is a repost I did not reply to the actual group...

1)For the mailbox store there are two stores and they are 4gb in total

2)All the log i see is:

The VSS service is shutting down due to idle timeout.

and this is 3 mins after the backup errors out.

3)Defiantly using the 64bit file daemon.

On Thu, Mar 4, 2010 at 4:53 PM, James Harper <james.harper AT bendigoit.com DOT au> wrote:
There have been a few reports of problems on 2007 but I've been unable
to replicate them. The reports are somewhat different to yours though.
Here's some questions...

Can you tell me how big your mailbox store is?

Are there any messages in the windows event log that might be relevant?

Are you definitely running the 64 bit version of bacula?

Thanks

James

> -----Original Message-----
> From: Gregory Durham [mailto:gregory.durham AT gmail DOT com]
> Sent: Friday, 5 March 2010 11:50
> To: James Harper
> Cc: bacula-users AT lists.sourceforge DOT net
> Subject: Re: [Bacula-users] Bacula Exchange plugin question
>
> Thanks for replying and it is Server 2008 x64 and Exchange 2007. I
completely
> forgot to mention it.
>
> Thanks,
> Greg
>
>
> On Thu, Mar 4, 2010 at 4:40 PM, James Harper
<james.harper AT bendigoit.com DOT au>
> wrote:
>
>
>       Exchange 2003 or 2007? (or 2010?)
>
>       James
>
>
>       > -----Original Message-----
>       > From: Gregory Durham [mailto:gregory.durham AT gmail DOT com]
>       > Sent: Friday, 5 March 2010 04:02
>       > To: bacula-users AT lists.sourceforge DOT net
>       > Subject: [Bacula-users] Bacula Exchange plugin question
>       >
>       > Hello all,
>       > I am having a problem with bacula backing up exchange server.
The
>       error logs
>       > are at the bottom. I just upgraded to version 5.0.1 as I was
having a
>       similar
>       > issue on 3.0.3.
>       >
>       > My configuration on the server is as follows:
>       >
>       > JobDefs {
>       >   Name = "ExchangeJob"
>       >   Type = Backup
>       >   Level = Full
>       >   Schedule = "DailyCycleMultipleTimes"
>       >   Storage = "priTape"
>       >   Messages = Standard
>       >   Pool = MondayPool
>       >   Priority = 5
>       > }
>       >
>       > Storage {
>       >   Name = "priTape"
>       >   Address = San02.example.com
>       >   Device = "bigTape"
>       >   Media Type = Tape
>       >   Password = ""
>       > }
>       >
>       > FileSet {
>       >         Name = "exchangeBackup"
>       >         Include {
>       >                 options {sparse = yes}
>       >                 File = "E:/"
>       >                 File = "F:/"
>       >                 Plugin = "exchange:/@EXCHANGE/Microsoft
Information
>       Store"
>       >         }
>       >         Exclude {
>       >                 File = "E:/MAILBOX/e00.chk"
>       >                 File = "E:/MAILBOX/Mailbox Database.edb"
>       >                 File = "E:/MAILBOX/tmp.edb"
>       >                 File = "E:/PUBLIC FOLDERS/e01.chk"
>       >                 File = "E:/PUBLIC FOLDERS/Public Folder
Database.edb"
>       >                 File = "E:/PUBLIC FOLDERS/tmp.edb"
>       >                 File = "E:/EXECUTIVE MB/E02.chk"
>       >                 File = "E:/EXECUTIVE MB/Executive Mailbox.edb"
>       >                 File = "E:/EXECUTIVE MB/tmp.edb"
>       >         }
>       > }
>       >
>       > Job {
>       >     Name ="exchangeBK"
>       >     JobDefs = "ExchangeJob"
>       >     FileSet = "exchangeBackup"
>       >     Client = "exchange-fd"
>       >     Messages = Standard
>       >     RunBeforeJob = "/opt/bacula/etc/resetTape.sh"
>       > }
>       >
>       > Schedule {
>       >   Name = "DailyCycleMultipleTimes"
>       >   Run = Full POOL=MondayPool Monday at 18:00
>       >   Run = Full POOL=TuesdayPool Tuesday at 18:00
>       >   Run = Full POOL=WednesdayPool Wednesday at 18:00
>       >   Run = Full POOL=ThursdayPool Thursday at 18:00
>       >   Run = Full POOL=FridayPool Friday at 18:00
>       > }
>       >
>       > Client {
>       >   Name = exchange-fd
>       >   Address = exchange.example.com
>       >   FDPort = 9102
>       >   Catalog = MyCatalog
>       >   Heartbeat Interval = 60
>       >   Password = ""          # password for FileDaemon
>       >   File Retention = 30 days            # 30 days
>       >   Job Retention = 6 months            # six months
>       >   AutoPrune = yes                     # Prune expired
Jobs/Files
>       > }
>       >
>       > Here is a pool, there are 5 of them (one for each day of the
week.
>       >
>       > Pool {
>       >   Name = MondayPool
>       >   Pool Type = Backup
>       >   Recycle = yes                       # Bacula can
automatically
>       recycle
>       > Volumes
>       >   AutoPrune = yes                     # Prune expired volumes
>       >   Volume Use Duration = 16 hours
>       >   Volume Retention = 13 days         # two weeks
>       >   Label Format = "${Pool}-${Day}-${Month}-${Year}"
>       > }
>       >
>       >
>       >
>       >
>       >
>       >
>       >
>       >
>       > 04-Mar 08:24 san02-dir JobId 7: shell command: run BeforeJob
>       > "/opt/bacula/etc/resetTape.sh"
>       > 04-Mar 08:25 san02-dir JobId 7: Start Backup JobId 7,
>       Job=exchangeBK.2010-03-
>       > 04_08.24.23_03
>       > 04-Mar 08:25 san02-dir JobId 7: Created new Volume
>       "MondayPool-4-3-2010" in
>       > catalog.
>       > 04-Mar 08:25 san02-dir JobId 7: Using Device "bigTape"
>       > 04-Mar 08:25 san02-sd JobId 7: Labeled new Volume
>       "MondayPool-4-3-2010" on
>       > device "bigTape" (/dev/rmt/0mbn).
>       > 04-Mar 08:25 san02-sd JobId 7: Wrote label to prelabeled
Volume
>       "MondayPool-4-
>       > 3-2010" on device "bigTape" (/dev/rmt/0mbn)
>       > 04-Mar 08:25 exchange-fd JobId 7: Generate VSS snapshots.
Driver="VSS
>       Vista",
>       > Drive(s)="EF"
>       > 04-Mar 08:30 san02-sd JobId 7: Fatal error: append.c:156 Error
reading
>       data
>       > header from FD. ERR=No data available
>       > 04-Mar 08:30 san02-sd JobId 7: Job write elapsed time =
00:04:51,
>       Transfer
>       > rate = 22.92 M Bytes/second
>       > 04-Mar 08:30 san02-sd JobId 7: Fatal error: bsock.c:488 Packet
size
>       too big
>       > from "client:10.0.0.206:36643. Terminating connection.
>       > 04-Mar 08:30 exchange-fd JobId 7: Fatal error:
>       > /home/kern/bacula/k/bacula/src/filed/backup.c:1019 Network
send error
>       to SD.
>       > ERR=Input/output error
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
"ASR
>       Writer",
>       > State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
"System
>       > Writer", State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
"IIS
>       Config
>       > Writer", State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
"WMI
>       Writer",
>       > State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
"BITS
>       Writer",
>       > State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
"IIS
>       Metabase
>       > Writer", State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
"COM+
>       REGDB
>       > Writer", State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
"Shadow
>       Copy
>       > Optimization Writer", State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>       "Registry
>       > Writer", State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 exchange-fd JobId 7: VSS Writer (BackupComplete):
>       "Microsoft
>       > Exchange Writer", State: 0x1 (VSS_WS_STABLE)
>       > 04-Mar 08:32 san02-dir JobId 7: Error: Bacula san02-dir 5.0.1
>       (24Feb10): 04-
>       > Mar-2010 08:32:18
>       >   Build OS:               i386-pc-solaris2.11 solaris 5.11
>       >   JobId:                  7
>       >   Job:                    exchangeBK.2010-03-04_08.24.23_03
>       >   Backup Level:           Full
>       >   Client:                 "exchange-fd" 5.0.0 (24Jan10)
Linux,Cross-
>       > compile,Win64
>       >   FileSet:                "exchangeBackup" 2010-03-02 18:00:00
>       >   Pool:                   "MondayPool" (From Job resource)
>       >   Catalog:                "MyCatalog" (From Client resource)
>       >   Storage:                "priTape" (From Job resource)
>       >   Scheduled time:         04-Mar-2010 08:24:19
>       >   Start time:             04-Mar-2010 08:25:09
>       >   End time:               04-Mar-2010 08:32:18
>       >   Elapsed time:           7 mins 9 secs
>       >   Priority:               5
>       >   FD Files Written:       415
>       >   SD Files Written:       415
>       >   FD Bytes Written:       6,671,943,952 (6.671 GB)
>       >   SD Bytes Written:       6,671,751,219 (6.671 GB)
>       >   Rate:                   15552.3 KB/s
>       >   Software Compression:   None
>       >   VSS:                    yes
>       >   Encryption:             no
>       >   Accurate:               no
>       >   Volume name(s):         MondayPool-4-3-2010
>       >   Volume Session Id:      1
>       >   Volume Session Time:    1267719836
>       >   Last Volume Bytes:      6,676,733,952 (6.676 GB)
>       >   Non-fatal FD errors:    0
>       >   SD Errors:              0
>       >   FD termination status:  Error
>       >   SD termination status:  Error
>       >   Termination:            *** Backup Error ***
>       >
>       >
>       > Thanks to anyone who has any ideas.
>       >
>       > Thanks,
>       > Greg
>       >
>
>
>


------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users