Greetings,
I am having an issue in that the director cannot communicate
with a particular file daemon. The file daemon in question is running on the same
machine as the storage daemon.
If the file daemon is not running, the director has no problem
with any other file daemons, but if the fd in question is running, the director
can communicate with other clients only until a failed try with the problem fd.
The included console output shows this anomaly. Notice that the
estimate works fine for 2 different clients, then fails when trying to access the
“bad” client, then can no longer access the previously good clients.
Also possibly of note is the fact that the Fatal Error line
shows that the director seems to be stuck on the bad fd (xxx.xxx.0.70:9102) after the original failure…
Thanks for any suggestions.
#estimate
…
Using Catalog "MyCatalog"
Connecting to Client bacula-fd at xxx.xxx.0.71:9102
2000 OK estimate files=197593 bytes=20,445,781,245
#estimate
…
Using Catalog "MyCatalog"
Connecting to Client MISD620-fd at xxx.xxx.61.7:9102
2000 OK estimate files=100996 bytes=40,012,706,471
#estimate
…
Using Catalog "MyCatalog"
Connecting to Client remotefs-fd at xxx.xxx.0.70:9102
Failed to connect to Client.
19-Nov 15:24 bacula-dir JobId 0: Fatal error: File daemon at
" xxx.xxx.0.70:9102" rejected Hello command
#estimate
…
Using Catalog "MyCatalog"
Connecting to Client bacula-fd at xxx.xxx.0.71:9102
Failed to connect to Client.
19-Nov 15:25 bacula-dir JobId 0: Fatal error: Unable to
authenticate with File daemon at " xxx.xxx.0.70:9102". Possible
causes:
Passwords or names not the same or
Maximum Concurrent Jobs exceeded on the FD or
FD networking messed up (restart daemon).
Please see
http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors for help.
#estimate
…
Using Catalog "MyCatalog"
Connecting to Client MISD620-fd at xxx.xxx.61.7:9102
Failed to connect to Client.
19-Nov 15:25 bacula-dir JobId 0: Fatal error: Unable to
authenticate with File daemon at " xxx.xxx.0.70:9102". Possible
causes:
Passwords or names not the same or
Maximum Concurrent Jobs exceeded on the FD or
FD networking messed up (restart daemon).
Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors
for help.
#
Paul E. Binkley
Objective Interface Systems, Inc.
220 Spring St., Suite 530
Herndon, VA 20170
Tel: 703.295.6528
Fax: 703.296.6501
paul.binkley AT ois DOT com
http://www.ois.com
***************************************************************
This email contains
information confidential and proprietary
to Objective
Interface Systems, Inc. and should not be
disclosed to third
parties without written permission from
Objective Interface
Systems, Inc. If this was delivered to
someone other than
the intended recipient by mistake please
***************************************************************
