Re: [Bacula-users] Quantum Superloader3 LT04
2009-03-09 13:07:17
Hi All,
I manually loaded a tape in the drive and ran "btape" test.
All went well, except at the auto changer bit, where is gave me unload
status=Bad 268435457 although the tape was unloaded to its
slot.
I do have mt-st installed.
btape runs as root so as bacula-sd
Any one can help me to get this solved?
So you think my sd-conf is wrong?
Can anyone please point to the proper direction to fix this.
Kind Regards,
Prashant
=== Autochanger test ===
3301 Issuing autochanger "loaded" command.
btape: btape.c:1169-0 run_prog: /etc/bacula/mtx-changer /dev/sg2 loaded
1 /dev/nst0 0 stat=0 result="1
"
Slot 1 loaded. I am going to unload it.
btape: btape.c:1183-0 Results from loaded query=1
btape: dev.c:1836-0 close_dev "TapeDrive" (/dev/nst0)
btape: dev.c:1826-0 Clear volhdr vol=
3302 Issuing autochanger "unload 1 0" command.
unload status=Bad 268435457
3992 Bad autochanger command: /etc/bacula/mtx-changer /dev/sg2 unload 1
/dev/nst0 0
3992 result="Unloading drive 0 into Storage Element 1...mtx: Request
Sense: Long Report=yes
": ERR=Child exited with code 1
3303 Issuing autochanger "load 1 0" command.
btape: btape.c:1211-0 Changer=/etc/bacula/mtx-changer /dev/sg2 load 1
/dev/nst0 0
btape: dev.c:1836-0 close_dev "TapeDrive" (/dev/nst0)
btape: dev.c:1843-0 device "TapeDrive" (/dev/nst0) already closed vol=
btape: btimers.c:107-0 watchdog 80d7850 term PID 10942
3993 Bad autochanger command: /etc/bacula/mtx-changer /dev/sg2 load 1
/dev/nst0 0
3993 result="Drive 0 Full (Storage Element 1 loaded)
": ERR=Child died from signal 15: Termination
You must correct this error or the Autochanger will not work.
*btape: btape.c:2581 "" is an invalid command
*btape: btape.c:2581 "" is an invalid command
*
mimmo lariccia wrote:
> Date: Mon, 9 Mar 2009 10:00:00 -0400
> From: drescherjm AT gmail DOT com
> To: prashant AT bluebarracuda DOT com; Bacula-users AT lists.sourceforge DOT net
> Subject: Re: [Bacula-users] Quantum Superloader3 LT04
>
> On Mon, Mar 9, 2009 at 5:17 AM, Prashant Ramhit
> <prashant AT bluebarracuda DOT com> wrote:
> > Hi All,
> >
> > Any one had previous with Quantum superloader 3 before,
please let me know.
> >
> > btape is not working but mtx work fine.
> >
> > Is there any further logging I can enable, to get more
information for what
> > btape is finding wrong.
> >
> >
> Bacula executables (utility tools + daemons) accept -d 100 as a
param
> and this will enable debug output.
>
> John
And in every case:
- have You tried to pre-load manually a tape into the drives and then
run the "btape" test?
And more over:
- have You checked who are the owners of
/usr/sbin/b_<<commands>> ?
Cheers...
>
------------------------------------------------------------------------------
> Open Source Business Conference (OSBC), March 24-25, 2009, San
Francisco, CA
> -OSBC tackles the biggest issue in open source: Open Sourcing the
Enterprise
> -Strategies to boost innovation and cut costs with open source
participation
> -Receive a $600 discount off the registration fee with the source
code: SFAD
> http://p.sf.net/sfu/XcvMzF8H
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
Get news, entertainment and everything you care about at Live.com. Check
it out!
|
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|