Hi,

I have a problem with a new lto-4 tape. Only 411 GB were written on it, then
bacula detected an write error. 

JobId 9250: Error: block.c:568 Write error at 411:14724 on device 
"ULTRIUM-TD4-D2"
            (/dev/ULTRIUM-TD4-D2).  ERR=Eingabe-/Ausgabefehler.
JobId 9250: Error: Re-read of last block OK, but block numbers differ.
             Last block=32305463 Current block=32307189.
JobId 9250: End of medium on Volume "A00151L4" Bytes=411,923,570,688
            Blocks=6,385,223 at 03-Feb-2009 20:44.


And at the same time in the kernel log:

kernel: sense key: Medium Error
kernel:     Additional sense: Write error
kernel: Info fld=0xfc00

No doubt there was a problem. The big question is: will this be a problem
during a restore? bacula changed the tape and continued but didn't mark
the tape as faulty.

The job is still running and will backup 9 TB. Any idea how to test the tape?
Which of the b* tools would be the right one for this?


Ralf

------------------------------------------------------------------------------
Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM)
software. With Adobe AIR, Ajax developers can use existing skills and code to
build responsive, highly engaging applications that combine the power of local
resources and data with the reach of the web. Download the Adobe AIR SDK and
Ajax docs to start building applications today-http://p.sf.net/sfu/adobe-com
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users