Hello,
I have removed a tape from my autochanger, and I have set the InChanger flag to 0
with the update volume command
Now, I try to restore a file from this tape.
I would expect that bacula asks for an intervention to insert the missing tape;
instead,
bacula trie to mount the missing tape (the slot has been left empty), fails
with timeout
and my restore session terminates with fatal error.
*list media
Pool: System
+---------+------------+-----------+---------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType |
LastWritten |
+---------+------------+-----------+---------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 1 | NF0018L3 | Used | 1 | 489,194,496 | 30 |
176,400 | 1 | 1 | 1 | LTO4 |
2008-10-25 12:16:05 |
| 3 | NF0020L3 | Used | 1 | 251,274,240 | 24 |
176,400 | 1 | 3 | 0 | LTO4 |
2008-10-26 10:16:04 |
| 4 | NF0028L3 | Append | 1 | 254,822,400 | 27 |
176,400 | 1 | 4 | 1 | LTO4 |
2008-10-27 12:37:56 |
+---------+------------+-----------+---------+-------------+----------+--------------+---------+------+-----------+-----------+---------------------+
...
MediaId 3 / slot 3 is not in the autochanger; the InChanger flag is 0
and the traces for the restore session:
27-Oct 13:56 fn-archnfs-dir JobId 224: Start Restore Job
RestoreFiles.2008-10-27_13.56.40
27-Oct 13:56 fn-archnfs-dir JobId 224: Using Device "Drive-1"
27-Oct 13:56 fn-archnfs-sd JobId 224: Invalid slot=0 defined in catalog for
Volume "NF0020L3" on "Drive-1" (/dev/nst0). Manual load
may be required.
27-Oct 13:56 fn-archnfs-sd JobId 224: 3307 Issuing autochanger "unload slot 4,
drive 0" command.
27-Oct 13:57 fn-archnfs-sd JobId 224: Warning: acquire.c:260 Wrong Volume
mounted on device "Drive-1" (/dev/nst0): Wanted NF0020L3
have NF0028L3
27-Oct 13:57 fn-archnfs-sd JobId 224: 3301 Issuing autochanger "loaded? drive
0" command.
27-Oct 13:57 fn-archnfs-sd JobId 224: 3302 Autochanger "loaded? drive 0",
result: nothing loaded.
27-Oct 13:57 fn-archnfs-sd JobId 224: 3304 Issuing autochanger "load slot 3,
drive 0" command.
27-Oct 14:02 fn-archnfs-sd JobId 224: Fatal error: 3992 Bad autochanger "load
slot 3, drive 0": ERR=Child died from signal 15:
Termination.
Results=source Element Address 1003 is Empty
Program killed by Bacula watchdog (timeout)
is this the normal behaviour ?
thx for your help
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|