Hi all,

I found the following text inside of the manual:

----snipet----
If you would like to know what options you have set before making any of
the changes noted above, you can now view them on Linux systems, thanks
to a tip provided by Willem Riede. Do the following:
become super user
mt -f /dev/nst0 stsetoptions 0

grep st0 /var/log/messages

and you will get output that looks something like the following:
kernel: st0: Mode 0 options: buffer writes: 1, async writes: 1, read 
ahead: 1
kernel: st0: can bsr: 0, two FMs: 0, fast mteom: 0, auto lock: 0,
kernel: st0: defs for wr: 0, no block limits: 0, partitions: 0, s2 log: 0
kernel: st0: sysv: 0 nowait: 0
----end----

Isn't it easyer to use:

mt -f /dev/nst0 stshowopt

What do you think?

Regards,
Stefan



-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users