Re: [Bacula-users] Backup Speed
2008-10-09 05:48:50
Stefan Lubitz schrieb:
> [...]
> 08-Oct 22:06 BACKUP3-sd JobId 10: Job write elapsed time = 06:26:12,
> Transfer rate = 70.36 M bytes/second
The job is writing with 70.36 MB/s to the spool device, which seems to
be ok to me.
> [...]
> 09-Oct 04:53 BACKUP3-sd JobId 10: Despooling elapsed time = 06:44:31,
> Transfer rate = 67.24 M bytes/second
Later it is despooling from disk to tape with an average of 67.24
MB/s, wich I think is also ok for LTO-4. I get between 75 and 80 MB/s.
> Rate: 32364.5 KB/s
The overall throughput (spooling + despooling) is 32 MB/s. This is
because of the extra time spend with first spooling the data to disk.
If you have mostly large files you could try backing up the data
directly. I have one server with a very fast raid that can be backed
up dirctly and has the same throughput when writing to tape, as it has
with despooling from disk.
Ralf
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|