On Fri, Sep 12, 2008 at 04:27:54PM -0400, John Drescher wrote:
> On Fri, Sep 12, 2008 at 4:22 PM, Jason Dixon <jdixon AT omniti DOT com> wrote:
> > I see this I/O error after every label attempt. Everything seems to be
> > fine, but I just want to know if this is expected behavior or anything
> > to watch out for.
> >
> > Connecting to Storage daemon Sony SDX-700C at backup-va-1:9103 ...
> > Sending label command for Volume "000074" Slot 4 ...
> > 3307 Issuing autochanger "unload slot 3, drive 0" command.
> > 3304 Issuing autochanger "load slot 4, drive 0" command.
> > 3305 Autochanger "load slot 4, drive 0", status is OK.
> > block.c:999 Read error on fd=6 at file:blk 0:0 on device "Sony SDX-700C"
> > (/dev/rmt/0cn). ERR=I/O error.
>
> This will happen on every never written tape because you can not read
> a blank tape.
Sounds like a good FAQ question. :)
Thanks,
--
Jason Dixon
OmniTI Computer Consulting, Inc.
jdixon AT omniti DOT com
443.325.1357 x.241
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|