I see this I/O error after every label attempt.  Everything seems to be
fine, but I just want to know if this is expected behavior or anything
to watch out for.

Connecting to Storage daemon Sony SDX-700C at backup-va-1:9103 ...
Sending label command for Volume "000074" Slot 4 ...
3307 Issuing autochanger "unload slot 3, drive 0" command.
3304 Issuing autochanger "load slot 4, drive 0" command.
3305 Autochanger "load slot 4, drive 0", status is OK.
block.c:999 Read error on fd=6 at file:blk 0:0 on device "Sony SDX-700C"
(/dev/rmt/0cn). ERR=I/O error.
3000 OK label. VolBytes=64512 DVD=0 Volume="000074" Device="Sony
SDX-700C" (/dev/rmt/0cn)
Catalog record for Volume "000074", Slot 4  successfully created.
Requesting to mount Sony SDX-700C ...
3001 Device "Sony SDX-700C" (/dev/rmt/0cn) is mounted with Volume
"000074"


Thanks,

-- 
Jason Dixon
OmniTI Computer Consulting, Inc.
jdixon AT omniti DOT com
443.325.1357 x.241 

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users