Re: [Bacula-users] trouble getting HP autochanger to work
2008-08-28 02:52:02
I've had something similar with my Dell PV132T.
If i've used the menu and taken it 'offline' I get a message very similar.
--John
jpg1792 wrote:
> Hi All,
>
> I've been tasked with getting a HP DLT SureStore Autochanger working
> with Bacula on a Gentoo Linux server. I know nothing about tape
> drives and I've been following what I can find online, but now I'm
> stuck.
>
> Here is the setup:
>
> # tapeinfo -f /dev/sg0
> Product Type: Tape Drive
> Vendor ID: 'QUANTUM '
> Product ID: 'DLT8000 '
> Revision: '023B'
> Attached Changer: No
> SerialNumber: 'CXA31P0013'
> MinBlock:2
> MaxBlock:16777214
> SCSI ID: 0
> SCSI LUN: 0
> Ready: no
>
> # tapeinfo -f /dev/sg1
> Product Type: Medium Changer
> Vendor ID: 'HP '
> Product ID: 'C6280-8000 '
> Revision: '2.12'
> Attached Changer: No
> SerialNumber: 'HP '
> TapeAlert[25]:Undefined.
> SCSI ID: 1
> SCSI LUN: 0
> Ready: no
>
> using the mtx command I get:
>
> # mtx -f /dev/sg0 inquiry
> Product Type: Tape Drive
> Vendor ID: 'QUANTUM '
> Product ID: 'DLT8000 '
> Revision: '023B'
> Attached Changer: No
>
> # mtx -f /dev/sg1 inquiry
> Product Type: Medium Changer
> Vendor ID: 'HP '
> Product ID: 'C6280-8000 '
> Revision: '2.12'
> Attached Changer: No
>
> So it looks like everything is found correctly, but then I try:
>
> # mtx -f /dev/sg1 status
> mtx: Request Sense: 70 00 04 00 00 00 00 46 00 00 00 00 40 80 00 00 00 00 00
> 00
> READ ELEMENT STATUS Command Failed
>
> I tried searching google for this error, but I can't find it anywhere.
>
> These are the relevant scsi messages from dmesg:
>
> scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
> scsi 0:0:0:0: Sequential-Access QUANTUM DLT8000 023B PQ: 0 ANSI: 2
> scsi 0:0:1:0: Medium Changer HP C6280-8000 2.12 PQ: 0 ANSI: 2
> st 0:0:0:0: Attached scsi tape st0
> st 0:0:0:0: Attached scsi generic sg0 type 1
> scsi 0:0:1:0: Attached scsi generic sg1 type 8
> ch 0:0:1:0: Attached scsi changer ch0
>
> I do have some other scsi devices attached, but this is the only one
> on this controller and it is properly terminated.
>
> Any help or advice on what I need to do next would be greatly appreciated.
>
> -Ezra
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|