John Drescher wrote:
> On Tue, Jul 22, 2008 at 12:44 PM, John Drescher <drescherjm AT gmail DOT com>
> wrote:
>>> Yes, I have an Exabyte 1U 10 tape changer with a VXA 320 drive in it. The
>>> problem
>>> looks like this:
>>>
>>> 19-Jul 03:32 khyber-sd JobId 2235: 3305 Autochanger "load slot 6, drive 0",
>>> status is OK.
>>> 19-Jul 03:32 khyber-sd JobId 2235: 3301 Issuing autochanger "loaded? drive
>>> 0" command.
>>> 19-Jul 03:32 khyber-sd JobId 2235: 3302 Autochanger "loaded? drive 0",
>>> result is Slot 6.
>>> 19-Jul 03:32 khyber-sd JobId 2235: Error: block.c:995 Read error on fd=3 at
>>> file:blk
>>> 0:0 on device "VXA3drive" (/dev/nst0). ERR=Input/output error.
>>> 19-Jul 03:32 khyber-sd JobId 2235: Error: block.c:995 Read error on fd=3 at
>>> file:blk
>>> 0:0 on device "VXA3drive" (/dev/nst0). ERR=Input/output error.
>>>
>> This problem looks to me that the mtx-changer script is still not
>> waiting properly. I mean the time should never be less than a minute
>> to load and read a tape.
>>
> Wait a minute do you have the line above this? I mean here is what I
> get for a successful load:
>
> 21-Jul 12:47 dev6-sd JobId 11243: 3304 Issuing autochanger "load slot
> 21, drive 0" command.
> 21-Jul 12:49 dev6-sd JobId 11243: 3305 Autochanger "load slot 21,
> drive 0", status is OK.
> 21-Jul 12:49 dev6-sd JobId 11243: Volume "A00045" previously written,
> moving to end of data.
Sorry, here is a more complete log:
19-Jul 03:27 khyber-sd JobId 2235: End of medium on Volume "A0000003"
Bytes=190,865,525,760 Blocks=2,958,604 at 19-Jul-2008 03:27.
19-Jul 03:29 khyber-sd JobId 2235: 3307 Issuing autochanger "unload slot 2,
drive 0"
command.
19-Jul 03:30 khyber-sd JobId 2235: 3304 Issuing autochanger "load slot 6, drive
0"
command.
19-Jul 03:32 khyber-sd JobId 2235: 3305 Autochanger "load slot 6, drive 0",
status is OK.
19-Jul 03:32 khyber-sd JobId 2235: 3301 Issuing autochanger "loaded? drive 0"
command.
19-Jul 03:32 khyber-sd JobId 2235: 3302 Autochanger "loaded? drive 0",
result is Slot 6.
19-Jul 03:32 khyber-sd JobId 2235: Error: block.c:995 Read error on fd=3 at
file:blk
0:0 on device "VXA3drive" (/dev/nst0). ERR=Input/output error.
19-Jul 03:32 khyber-sd JobId 2235: Error: block.c:995 Read error on fd=3 at
file:blk
0:0 on device "VXA3drive" (/dev/nst0). ERR=Input/output error.
And here is the mtx log at the same time:
20080719-03:29:25 Parms: /dev/sg3 unload 2 /dev/nst0 0
20080719-03:29:25 Doing libTool /dev/sg3 -m d1 s2
20080719-03:30:41 libTool unload returned 0
20080719-03:30:41 sleeping 5 sec after unload
20080719-03:30:46 Parms: /dev/sg3 load 6 /dev/nst0 0
20080719-03:30:46 Doing libTool /dev/sg3 -m s6 d1
20080719-03:31:12 libTool load returned 0
20080719-03:31:12 entered wait_for_drive
20080719-03:31:22 1 - mt status for /dev/nst0 returned IM_REP_EN
20080719-03:31:32 2 - mt status for /dev/nst0 returned IM_REP_EN
20080719-03:31:42 3 - mt status for /dev/nst0 returned BOT ONLINE IM_REP_EN
20080719-03:31:42 Elapsed time from load to drive ready: 56
20080719-03:31:42 waiting 60 sec before returning
20080719-03:32:42 Parms: /dev/sg3 loaded 6 /dev/nst0 0
20080719-03:32:42 Doing mtx -f /dev/sg3 status -- to find what is loaded
So you see it did wait until ONLINE. Then it waited an extra 60 sec for good
measure
before returning. total was 56 sec + 60 sec.
Mark
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
