John Drescher wrote:
> Is this a VXA PacketLoader?
>
>   
>> These were the previous messages:
>>
>> 14-jul 22:00 servfich-dir JobId 73: Start Backup JobId 73,
>> Job=Backup_de_Trabajo_Diario.2008-07-14_22.00.40
>> 14-jul 22:00 servfich-dir JobId 73: There are no more Jobs associated with
>> Volume "A0000001". Marking it purged.
>> 14-jul 22:00 servfich-dir JobId 73: All records pruned from Volume
>> "A0000001"; marking it "Purged"
>> 14-jul 22:00 servfich-dir JobId 73: Recycled volume "A0000001"
>> 14-jul 22:00 servfich-sd JobId 73: 3307 Issuing autochanger "unload slot 5,
>> drive 0" command.
>>     
>
> What tape is now in slot 5?
>
>   
>> 14-jul 22:04 servfich-dir JobId 73: Using Device "Driver1"
>> 14-jul 22:04 servfich-sd JobId 73: 3301 Issuing autochanger "loaded? drive
>> 0" command.
>> 14-jul 22:04 servfich-sd JobId 73: 3302 Autochanger "loaded? drive 0",
>> result: nothing loaded.
>> 14-jul 22:04 servfich-sd JobId 73: 3304 Issuing autochanger "load slot 1,
>> drive 0" command.
>> 14-jul 22:04 servfich-sd JobId 73: 3305 Autochanger "load slot 1, drive 0",
>> status is OK.
>> 14-jul 22:04 servfich-sd JobId 73: 3301 Issuing autochanger "loaded? drive
>> 0" command.
>> 14-jul 22:04 servfich-sd JobId 73: 3302 Autochanger "loaded? drive 0",
>> result is Slot 1.
>> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
>> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
>> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
>> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
>> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
>> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
>> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
>> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
>> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
>> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
>> 14-jul 22:04 servfich-sd JobId 73: Please mount Volume "A0000001" or label a
>>
>>
>>     
> Unless tape A0000001 is in slot 5 this looks like you need to modify
> the mtx-changer script to add a delay before wait_for_drive command.
> The problem I see here is it took 4 minutes to unload whatever tape
> was in the drive then it somehow loaded a tape in less than 1 minute.
> To me a 1 minute load is too way fast and the tape probably was not
> ready when the mtx-changer script exited.
>
> John
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>   
If you are using Ubuntu, the wait_for_drive function does not work, 
because mtx-changer incorrectly sets the ready string.  Are you using 
ubuntu?



-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users