Is this a VXA PacketLoader?

> These were the previous messages:
>
> 14-jul 22:00 servfich-dir JobId 73: Start Backup JobId 73,
> Job=Backup_de_Trabajo_Diario.2008-07-14_22.00.40
> 14-jul 22:00 servfich-dir JobId 73: There are no more Jobs associated with
> Volume "A0000001". Marking it purged.
> 14-jul 22:00 servfich-dir JobId 73: All records pruned from Volume
> "A0000001"; marking it "Purged"
> 14-jul 22:00 servfich-dir JobId 73: Recycled volume "A0000001"
> 14-jul 22:00 servfich-sd JobId 73: 3307 Issuing autochanger "unload slot 5,
> drive 0" command.

What tape is now in slot 5?

> 14-jul 22:04 servfich-dir JobId 73: Using Device "Driver1"
> 14-jul 22:04 servfich-sd JobId 73: 3301 Issuing autochanger "loaded? drive
> 0" command.
> 14-jul 22:04 servfich-sd JobId 73: 3302 Autochanger "loaded? drive 0",
> result: nothing loaded.
> 14-jul 22:04 servfich-sd JobId 73: 3304 Issuing autochanger "load slot 1,
> drive 0" command.
> 14-jul 22:04 servfich-sd JobId 73: 3305 Autochanger "load slot 1, drive 0",
> status is OK.
> 14-jul 22:04 servfich-sd JobId 73: 3301 Issuing autochanger "loaded? drive
> 0" command.
> 14-jul 22:04 servfich-sd JobId 73: 3302 Autochanger "loaded? drive 0",
> result is Slot 1.
> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
> 14-jul 22:04 servfich-sd JobId 73: Error: block.c:995 Read error on fd=6 at
> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
> 14-jul 22:04 servfich-sd JobId 73: Please mount Volume "A0000001" or label a
>
>
Unless tape A0000001 is in slot 5 this looks like you need to modify
the mtx-changer script to add a delay before wait_for_drive command.
The problem I see here is it took 4 minutes to unload whatever tape
was in the drive then it somehow loaded a tape in less than 1 minute.
To me a 1 minute load is too way fast and the tape probably was not
ready when the mtx-changer script exited.

John

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users