On Mon, Jun 30, 2008 at 11:34 AM, Jon Schewe <jpschewe AT mtu DOT net> wrote:
> Allan Black wrote:
>> I would like to have the tape ejected (and replaced in its slot)
>> at the end of each backup. One way of doing this, I think, would
>> be to issue the command "release <autochanger>" to bconsole in
>> an AfterJob. Does anyone know of a way to do it using the Bacula
>> configuration, e.g. with a combination of UseVolumeOnce,
>> AlwaysOpen=no, etc.?
>>
>>
> Another option would be to tell bacula to run a script after the backup
> and put an mtx unload in there. Then when bacula needs the tape it'll
> put it back in the drive.
>
I believe release would be better at that at least that way bacula
will know it needs to load the tape.

John

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users