[Bacula-users] back to the start - btape tests show problems

Subject:	[Bacula-users] back to the start - btape tests show problems
From:	James Bowes <james.bowes AT shaw DOT ca>
To:	Bacula Users <bacula-users AT lists.sourceforge DOT net>
Date:	Sat, 28 Jun 2008 05:32:32 -0700

Hi.

I have had so much problems I decided to start over with the btape
tests. Now I am getting errors for autochanger. What does this actually
mean:

28-Jun 05:27 btape JobId 0: Error: block.c:569 Write error at 0:295 on
device "DLT" (/dev/nst0). ERR=Input/output error

Thanks in advance.

--james


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

<Prev in Thread]	Current Thread	[Next in Thread>
[Bacula-users] back to the start - btape tests show problems, James Bowes <= Re: [Bacula-users] back to the start - btape tests show problems, John Drescher Re: [Bacula-users] back to the start - btape tests show problems, John Drescher Message not available [Bacula-users] Fwd: back to the start - btape tests show problems, John Drescher