> Just so I understand correctly - I should gzip disabled in the fileset or
> on? Sorry for the misunderstanding...
Do not use gzip in the fileset

> I haven't changed the blocksizes only
> enabled H/W compression. Should I turn the h/w compression off or leave it
> on?
>
The hardware should default to have hardware compression on and at the
proper density so in most cases you should not have to set this. The
reason why I recommend not to mess with the defaults is that you can
get the tape drive to operate in a lower density mode (35/70 ...) and
once data is on a tape in the lower density mode you must erase it
with the commands I gave in the previous email to get it back to
normal.

John

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users