|
I saw
this error every time I tried to use my newly installed
autoloader.
The
salient error is not "Please mount....." but instead "Error:
block.c...."
You
need to increase the wait time between issuing a changer command and bacula
trying to mount the tape drive.
HTH
-Gregg
Mmmm. The problem came again, but now with another tape.
Here I dump the messages shown by bacula:
19-jun 22:00
servfich-dir JobId 53: Start Backup JobId 53,
Job=Backup_de_Trabajo_Diario.2008-06-19_22.00.39
19-jun 22:00
servfich-dir JobId 53: There are no more Jobs associated with Volume
"A0000004". Marking it purged.
19-jun 22:00 servfich-dir JobId 53:
All records pruned from Volume "A0000004"; marking it "Purged"
19-jun
22:00 servfich-dir JobId 53: Recycled volume "A0000004"
19-jun 22:00
servfich-sd JobId 53: 3307 Issuing autochanger "unload slot 3, drive 0"
command.
19-jun 22:05 servfich-sd JobId 53: 3995 Bad autochanger
"unload slot 3, drive 0": ERR=Child died from signal 15:
Termination
Results=Unloading drive 0 into Storage Element
3...done
Program killed by Bacula watchdog (timeout)
19-jun 22:05
servfich-dir JobId 53: Using Device "Driver1"
19-jun 22:05
servfich-sd JobId 53: 3301 Issuing autochanger "loaded? drive 0"
command.
19-jun 22:05 servfich-sd JobId 53: 3302 Autochanger "loaded?
drive 0", result is Slot 3.
19-jun 22:05 servfich-sd JobId 53: 3307
Issuing autochanger "unload slot 3, drive 0" command.
19-jun 22:06
servfich-sd JobId 53: 3995 Bad autochanger "unload slot 3, drive 0":
ERR=Child exited with code 1
Results=Unloading drive 0 into Storage
Element 3...Destination Element Address 3 is Already Full
19-jun
22:06 servfich-sd JobId 53: 3301 Issuing autochanger "loaded? drive 0"
command.
19-jun 22:06 servfich-sd JobId 53: 3302 Autochanger "loaded?
drive 0", result: nothing loaded.
19-jun 22:06 servfich-sd JobId 53:
3301 Issuing autochanger "loaded? drive 0" command.
19-jun 22:06
servfich-sd JobId 53: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
19-jun 22:06 servfich-sd JobId 53: 3301 Issuing
autochanger "loaded? drive 0" command.
19-jun 22:06 servfich-sd JobId
53: 3302 Autochanger "loaded? drive 0", result: nothing
loaded.
19-jun 22:06 servfich-sd JobId 53: 3304 Issuing autochanger
"load slot 4, drive 0" command.
19-jun 22:08 servfich-sd JobId 53:
3305 Autochanger "load slot 4, drive 0", status is OK.
19-jun 22:08
servfich-sd JobId 53: 3301 Issuing autochanger "loaded? drive 0"
command.
19-jun 22:08 servfich-sd JobId 53: 3302 Autochanger "loaded?
drive 0", result is Slot 4.
19-jun 22:08 servfich-sd JobId 53: Error:
block.c:995 Read error on fd=6 at file:blk 0:0 on device "Driver1"
(/dev/nst0). ERR=Input/output error.
19-jun 22:08 servfich-sd JobId
53: Error: block.c:995 Read error on fd=6 at file:blk 0:0 on device
"Driver1" (/dev/nst0). ERR=Input/output error.
19-jun 22:08
servfich-sd JobId 53: Error: block.c:995 Read error on fd=6 at file:blk
0:0 on device "Driver1" (/dev/nst0). ERR=Input/output error.
19-jun
22:08 servfich-sd JobId 53: Error: block.c:995 Read error on fd=6 at
file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output
error.
19-jun 22:08 servfich-sd JobId 53: Please mount Volume
"A0000004" or label a new one for:
Job:
Backup_de_Trabajo_Diario.2008-06-19_22.00.39
Storage: "Driver1"
(/dev/nst0)
Pool:
JuevesPool
Media type:
VXA-X23
19-jun 23:08 servfich-sd JobId 53: Please mount Volume
"A0000004" or label a new one for:
Job:
Backup_de_Trabajo_Diario.2008-06-19_22.00.39
Storage: "Driver1"
(/dev/nst0)
Pool:
JuevesPool
Media type:
VXA-X23
20-jun 01:08 servfich-sd JobId 53: Please mount Volume
"A0000004" or label a new one for:
Job:
Backup_de_Trabajo_Diario.2008-06-19_22.00.39
Storage: "Driver1"
(/dev/nst0)
Pool:
JuevesPool
Media type:
VXA-X23
20-jun 05:08 servfich-sd JobId 53: Please mount Volume
"A0000004" or label a new one for:
Job:
Backup_de_Trabajo_Diario.2008-06-19_22.00.39
Storage: "Driver1"
(/dev/nst0)
Pool:
JuevesPool
Media type:
VXA-X23
I don't know why is it happening. I need some help of
you.
Thanks a lot.
--- El vie, 13/6/08, Javier Rodriguez
<ungue79 AT yahoo DOT es> escribió:
De:
Javier Rodriguez <ungue79 AT yahoo DOT es>
Asunto: Re:
[Bacula-users] Please mount Volume "A0000003" or label a new one
for...
Para: "John Drescher" <drescherjm AT gmail DOT com>
Fecha:
viernes, 13 junio, 2008 9:16
I know that, but this tape has been written once.
Furthermore, i only had to type in bconcole unmount and after
mount with the slot 3 which is where A0000003 is in, and
everything ran fine.
Anyway, i'll see if next week i have
the same problem with that tape, If i have, then may be the tape
doesn't work very well.
Thanks a lot.
--- El
jue, 12/6/08, John Drescher
<drescherjm AT gmail DOT com> escribió:
De:
John Drescher <drescherjm AT gmail DOT com>
Asunto: Re:
[Bacula-users] Please mount Volume "A0000003" or label a new
one for...
Para: ungue79 AT yahoo DOT es, "baculausers"
<Bacula-users AT lists.sourceforge DOT net>
Fecha: jueves,
12 junio, 2008 2:56
> 12-jun 08:07 servfich-sd JobId 47: Error: block.c:995 Read
error on fd=6 at
> file:blk 0:0 on device "Driver1" (/dev/nst0). ERR=Input/output
error.
> 12-jun 08:07 servfich-sd JobId 47: Please mount Volume
"A0000003" or label a
> new one for:
>
You should not see this error on a tape that has been written to it
unless the tape or
the drive is bad. If it is a never used tape this
is a normal error because the drive will not let you read an unwritten
tape.
John |
Enviado desde Correo Yahoo!
La bandeja de entrada
más inteligente.
|
Enviado desde Correo
Yahoo!
La bandeja de entrada más
inteligente.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
