Keith Sudbury schrieb:
> I have had this issue with Bacula I will label a tape "wednesday" put it 
> in "wed-pool" the correct pool. every thing is fine, then when I come to 
> use the tape I insert it mount it and I get the following:
> 
> Device status:
> Device "LTO-3" (/dev/nst0) is mounted with Volume="wednesday" 
> Pool="tue-pool"
>     Total Bytes Read=129,024 Blocks Read=2 Bytes/block=64,512
>     Positioned at File=0 Block=0

Just to be sure, can you post the output of 'list media pool=wed-pool'
and 'list media pool=tue-pool'?

Ralf

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users