On Tue, 3 Jun 2008, Steffen Knauf wrote:

> Hello,
>
> i want to backup a 1.3 TB directory to a DLT-S4 tape. The Maximum
> capacity of the dlt-s4 tape is 1,6 TB (compressed, but only a
> theoretical Value).
> After bacule wrote 1.1 TB to the tape, the tape was full.
> I unmount the full tape and mount a new, blank tape.
                              ^^^^^^^^^^^^^^^^^^^^^^^

> 03-Jun 15:56 mastermind-sd JobId 36: Error: block.c:995 Read error on
> fd=3 at file:blk 0:0 on device "SDLT_MUC" (/dev/st0). ERR=Input/output
> error.

Bacvula encountered a blank tape

> 03-Jun 15:56 c06-dir JobId 36: Created new Volume "Vol_full_lib_MUC0027"
> in catalog.

Bacula created a new volume entry - but apparently didn't label the tape.

> 03-Jun 15:56 mastermind-sd JobId 36: Please mount Volume
> "Vol_full_lib_MUC0027" or label a new one for:
>    Job:          Library_MUC.2008-06-02_18.22.03
>    Storage:      "SDLT_MUC" (/dev/st0)
>    Pool:         Full_Lib_MUC
>    Media type:   DLT-S4
> 03-Jun 15:58 mastermind-sd JobId 36: Error: block.c:995 Read error on
> fd=3 at file:blk 0:0 on device "SDLT_MUC" (/dev/st0). ERR=Input/output
> error.

Bacula found the blank tape again.

In /etc/bacula/bacula-sd.conf:

 Do you have "LabelMedia = yes;" in the device section?

 If that isn't there, then bacula will not label a blank tape and this
error is normal until you insert the tape that Bacula wants.

AB


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users