|
[Bacula-users] Ang. Ang. Ang. Re: Unload problem on Autochanger
2008-04-25 06:49:27
Here is part of my bacula-sd.conf, if
anyone can see a problem?
#
# An autochanger device with one drives
#
Autochanger {
Name = Autochanger
Device = TapeDevice-1
Changer Command = "/etc/bacula/mtx-changer
%c %o %S %a %d"
Changer Device = /dev/changer
}
Device {
Name = TapeDevice-1
Drive Index = 0
Media Type = LTO-G2
Archive Device = /dev/nst0
AutomaticMount = yes;
# when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
# Enable the Alert command only
if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo
-f %c |grep TapeAlert|cat'"
}
-----------------------------------------------------------------
Roger Sinel
-----------------------------------------------------------------
roger.sinel AT lo DOT se
Sänt av: bacula-users-bounces AT lists.sourceforge DOT net
04/25/2008 10:48 AM
|
|
Till
| bacula-users AT lists.sourceforge DOT net
|
|
Kopia
| lars.breimo AT lo DOT se
|
|
Ärende
| [Bacula-users] Ang. Ang.
Re: Unload problem on Autochanger |
|
How do I change this?
I suspect that /etc/bacula/mtx-changer dosn't work becuase
the default "changer-device" in bacula seems to be /dev/sg0
, but mine is /dev/sg3 .
[root@origo3 ~]# /etc/bacula/mtx-changer /dev/sg3 list 0 /dev/nst0 0
5:TYV240L2
6:TYV247L2
9:TYV236L2
12:TYV246L2
22:TYV238L2
11:TYV239L2
-----------------------------------------------------------------
Roger Sinel
www.nordickiwi.com
-----------------------------------------------------------------
roger.sinel AT lo DOT se
Sänt av: bacula-users-bounces AT lists.sourceforge DOT net
04/24/2008 04:54 PM
|
|
Till
| "John Drescher"
<drescherjm AT gmail DOT com>
|
|
Kopia
| lars.breimo AT lo DOT se, bacula-users AT lists.sourceforge DOT net
|
|
Ärende
| [Bacula-users] Ang. Re: Unload
problem on Autochanger |
|
Still not sure if its permissions or not.
It dosn't like "Sense Key"
[root@server ~]# /etc/bacula/mtx-changer /dev/sg0 load 11 /dev/nst0 0
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Illegal Request
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 20
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
READ ELEMENT STATUS Command Failed
[root@server ~]# su bacula
bash-3.00$ /etc/bacula/mtx-changer /dev/sg0 load 11 /dev/nst0 0
cannot open SCSI device '/dev/sg0' - Permission denied
[root@server ~]# ll /dev/sg0 crw-rw---- 1 root root
21, 0 11 jan 2007 /dev/sg0
/Roger Sinel
-----------------------------------------------------------------
-----------------------------------------------------------------
| "John Drescher"
<drescherjm AT gmail DOT com>
04/24/2008 02:11 PM
|
|
Till
| roger.sinel AT lo DOT se
|
|
Kopia
| bacula-users AT lists.sourceforge DOT net
|
|
Ärende
| Re: [Bacula-users] (no subject) |
|
On Thu, Apr 24, 2008 at 7:01 AM, <roger.sinel AT lo DOT se> wrote:
>
> Unload problem on Autochanger, I not 100% sure about the history of
this
> problem, but I know that the automatic unload/load function dosn't
work
> properly.
>
> To do it manually I have to stop bacula-sd service to be able to run
#mtx
> unload. So when a tape is full the bacula jobb can't unload or load
a new
> append volume.
>
> Is it a mtx problem or a permissions problem between bacula and mtx.
>
> I can move and load the new tape with the HP web admin site to the
> Autochanger without have to stop the bacula-sd service, then run mount
> command from bconsole. Then as you below the restore jobb that was
waiting
> for a specific tape was able to continue.
>
> Any tips would be appreciated, as holiday times are coming up and
changing
> tapes over vpn from the beach ain't much fun.
>
I would start by trying to run mtx-changer from the shell and see what
errors are posted when running that. You may first want to run this as
root and later run it as whatever user that the bacula-sd process runs
under.
John
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|
