Tim Chipman a écrit :
> check your config file for the specific server in question
>
> I found this same behaviour, it is if you have a null path at end of
> stanza of paths to backup
>
> so what it is literally telling you, is that it finished the first
> (real, desired) work
> but failed on the (unwanted, null) work
>
> hence the confusion
>
> In my case, I think the null field was appended via the web interface,
> by accident, when I was doing initial config / setup of paths to be
> backed up. At first I thought it was an rsync issue, but I had
> identical behaviour with "tar" as well. Lots of fun! :-)
>
> Took a few weeks before the answer jumped out at me..
>
> -Tim
Tim, it's OK now !
You are right ;-)
I had checked and suppress some folders and keep only "/etc" BEFORE
write on the ML...
but NEVER I think to remove this stupid empty line at the bottom of the
folders list on the Xfer page ! ...
Now I click on "delete" and suppress the line, and all is normal.
BackupPC finish correctly. No error message ;-)
Thank a lot for your very fast (and intersting) reply ;-)
I make a note on my blog (en français) about this problem and the
solution, because I search a long time and it can be useful for other
;-)
http://didier.misson.net/blog/2009/01/26/backuppc-backup-aborted
> On Sun, Jan 25, 2009 at 6:31 PM, Didier Misson <didier.linux AT gmail DOT
> com> wrote:
>> Hello,
>>
>> I'm new on this mailing list.
>>
>> I use BackupPc since several months on an Ubuntu 8.04 server.
>> No problem with it.
>> I backup 2 Debian Etch servers : fine ;-)
>>
>> But these backups are very slow because my backup server is at home on
>> an ADSL line 6Mbps ...
>> If a crash occurs (I hope no), I will need to restore at the upload
>> speed of 640 Kbps... :-( very long !
>>
>>
>> So, we decide to install BackupPc on our secondary server (hosted by OVH).
>>
>> ================================================
>>
>> I try to backup our main server, on the BackupPc running on the
>> secondary server.
>>
>> Both servers are :
>>
>> Debian GNU/Linux 4.0
>>
>> Linux ks12345.kimsufi.com 2.6.27.10-grsec-xxxx-grs-ipv6-64
>>
>>
>>
>> Due to problem when I try to install BackupPc on the secondary server
>> (and BackupPC too old in Debian), I add "Backup Port" on the apt source
>> list on this secondary server.
>>
>> Here is the version :
>>
>> ~$ aptitude show backuppc
>> Package: backuppc
>> State: installed
>> Automatically installed: no
>> Version: 3.1.0-4~bpo40+1 <-----
>> Priority: optional
>> Section: utils
>> ..
>>
>>
>>
>>
>>
>> I ALWAYS have the same problem :
>>
>> - backup seem to run correctly : all files are seen in the log and are
>> backup
>> - at the end of the backup, a message "Done: 1837 files, 43529611 bytes
>> Backup aborted ()"
>>
>> and... the backup aborted just at the END !
>>
>> So :
>> - it always keep the partial first backup it try to make
>> - as no successfull backup, each time BackupPc try to make a FULL backup
>> again... very long !
>>
>>
>> --------------------------------------------------------
>>
>> Here is the log :
>>
>> Contents of file /backup/pc/ks12345.kimsufi.com/XferLOG.bad.z, modified
>> 2009-01-25 22:44:01
>>
>> full backup started for directory /etc
>> Running: /usr/bin/ssh -q -x -l root ks28853.kimsufi.com /usr/bin/rsync
>> --server --sender --numeric-ids --perms --owner --group -D --links
>> --hard-links --times --block-size=2048 --recursive --ignore-times . /etc/
>> Xfer PIDs are now 15588
>> Got remote protocol 29
>> Negotiated protocol version 28
>> Xfer PIDs are now 15588,15589
>> create d 755 0/0 4096 .
>> create 600 0/0 0 .pwd.lock
>> same 644 0/0 588 GeoIP.conf.default
>> same 644 0/0 611 Net
>> create d 755 0/0 4096 X11
>> create d 755 0/0 4096 X11/Xresources
>> same 644 0/0 319 X11/Xresources/x11-common
>> same 755 0/0 3944 X11/Xsession
>> create d 755 0/0 4096 X11/Xsession.d
>> same 644 0/0 1869
>> X11/Xsession.d/20x11-common_process-args
>> ...
>>
>> ...
>> create d 755 0/0 4096 vim
>> same 644 0/0 2318 vim/vimrc
>> same 644 0/0 774 vim/vimrc.tiny
>> create d 755 0/0 4096 w3m
>> same 644 0/0 1185 w3m/config
>> same 644 0/0 44 w3m/mailcap
>> same 644 0/0 4221 wgetrc
>> create d 755 0/0 4096 xml
>> same 644 0/0 475 xml/catalog
>> same 644 0/0 360 xml/catalog.old
>> same 644 0/0 517 xml/xml-core.xml
>> same 644 0/0 381 xml/xml-core.xml.old
>> Done: 1837 files, 43529611 bytes
>>
>> Backup aborted () <======= no error code !!!
>>
>> Not saving this as a partial backup since it has fewer files than the
>> prior one (got 1837 and 1837 files versus 140628)
>>
>>
>>
>> The problem is that this message "Backup aborted" has NO error code !
>> So how can I search on the net to see what error and what solution ?
--
Didier
http://didier.misson.net/blog
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki: http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
|