BackupPC-users

Re: [BackupPC-users] BackuPC ended with "Backup aborted ()"

2009-01-25 18:08:34
Subject: Re: [BackupPC-users] BackuPC ended with "Backup aborted ()"
From: Tim Chipman <tchipman AT gmail DOT com>
To: "General list for user discussion, questions and support" <backuppc-users AT lists.sourceforge DOT net>
Date: Sun, 25 Jan 2009 19:06:43 -0400
check your config file for the specific server in question

I found this same behaviour, it is if you have a null path at end of
stanza of paths to backup

so what it is literally telling you, is that it finished the first
(real, desired) work
but failed on the (unwanted, null) work

hence the confusion

In my case, I think the null field was appended via the web interface,
by accident, when I was doing initial config / setup of paths to be
backed up.  At first I thought it was an rsync issue, but I had
identical behaviour with "tar" as well.  Lots of fun! :-)

Took a few weeks before the answer jumped out at me..

-Tim

On Sun, Jan 25, 2009 at 6:31 PM, Didier Misson <didier.linux AT gmail DOT com> 
wrote:
> Hello,
>
> I'm new on this mailing list.
>
> I use BackupPc since several months on an Ubuntu 8.04 server.
> No problem with it.
> I backup 2 Debian Etch servers : fine ;-)
>
> But these backups are very slow because my backup server is at home on
> an ADSL line 6Mbps ...
> If a crash occurs (I hope no), I will need to restore at the upload
> speed of 640 Kbps...  :-(    very long !
>
>
> So, we decide to install BackupPc on our secondary server (hosted by OVH).
>
> ================================================
>
> I try to backup our main server, on the BackupPc running on the
> secondary server.
>
> Both servers are :
>
> Debian GNU/Linux 4.0
>
> Linux ks12345.kimsufi.com 2.6.27.10-grsec-xxxx-grs-ipv6-64
>
>
>
> Due to problem when I try to install BackupPc on the secondary server
> (and BackupPC too old in Debian), I add "Backup Port" on the apt source
> list on this secondary server.
>
> Here is the version :
>
> ~$ aptitude show backuppc
> Package: backuppc
> State: installed
> Automatically installed: no
> Version: 3.1.0-4~bpo40+1    <-----
> Priority: optional
> Section: utils
> ..
>
>
>
>
>
> I ALWAYS have the same problem :
>
> - backup seem to run correctly : all files are seen in the log and are
> backup
> - at the end of the backup, a message "Done: 1837 files, 43529611 bytes
> Backup aborted ()"
>
> and... the backup aborted just at the END !
>
> So :
> - it always keep the partial first backup it try to make
> - as no successfull backup, each time BackupPc try to make a FULL backup
> again... very long !
>
>
> --------------------------------------------------------
>
> Here is the log :
>
> Contents of file /backup/pc/ks12345.kimsufi.com/XferLOG.bad.z, modified
> 2009-01-25 22:44:01
>
> full backup started for directory /etc
> Running: /usr/bin/ssh -q -x -l root ks28853.kimsufi.com /usr/bin/rsync
> --server --sender --numeric-ids --perms --owner --group -D --links
> --hard-links --times --block-size=2048 --recursive --ignore-times . /etc/
> Xfer PIDs are now 15588
> Got remote protocol 29
> Negotiated protocol version 28
> Xfer PIDs are now 15588,15589
>  create d 755       0/0        4096 .
>  create   600       0/0           0 .pwd.lock
>  same     644       0/0         588 GeoIP.conf.default
>  same     644       0/0         611 Net
>  create d 755       0/0        4096 X11
>  create d 755       0/0        4096 X11/Xresources
>  same     644       0/0         319 X11/Xresources/x11-common
>  same     755       0/0        3944 X11/Xsession
>  create d 755       0/0        4096 X11/Xsession.d
>  same     644       0/0        1869
> X11/Xsession.d/20x11-common_process-args
> ...
>
> ...
> create d 755       0/0        4096 vim
>  same     644       0/0        2318 vim/vimrc
>  same     644       0/0         774 vim/vimrc.tiny
>  create d 755       0/0        4096 w3m
>  same     644       0/0        1185 w3m/config
>  same     644       0/0          44 w3m/mailcap
>  same     644       0/0        4221 wgetrc
>  create d 755       0/0        4096 xml
>  same     644       0/0         475 xml/catalog
>  same     644       0/0         360 xml/catalog.old
>  same     644       0/0         517 xml/xml-core.xml
>  same     644       0/0         381 xml/xml-core.xml.old
> Done: 1837 files, 43529611 bytes
>
> Backup aborted ()   <=======   no error code !!!
>
> Not saving this as a partial backup since it has fewer files than the
> prior one (got 1837 and 1837 files versus 140628)
>
>
>
>
> The problem is that this message "Backup aborted" has NO error code !
> So how can I search on the net to see what error and what solution ?
>
>
>
> Thanks for your help,
>
> Good evening
>
> ;-)
>
>
>
> --
> Didier
>
> http://www.les-objets-de-maman.be : objets, meubles et tableau à vendre
> http://gallery.les-objets-de-maman.be : les photos des objets
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> SourcForge Community
> SourceForge wants to tell your story.
> http://p.sf.net/sfu/sf-spreadtheword
> _______________________________________________
> BackupPC-users mailing list
> BackupPC-users AT lists.sourceforge DOT net
> List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
> Wiki:    http://backuppc.wiki.sourceforge.net
> Project: http://backuppc.sourceforge.net/
>

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List:    https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki:    http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/