Re: IO Errors backing up to new LTO3
2008-06-16 23:04:40
2008/6/16 Andrew Best <festivus AT gmail DOT com>:
I have done a lot of testing to try and isolate the fault and i've satisfied myself that the problem is not with the SCSI subsystem (though i'm prepared to be told im wrong). Looks like I may have to eat humble pie. I was possibly wrong on the no SCSI problems.
Reran the dump this morning after a power cycle on the host. It failed with the usual error. Found the following in dmesg:
Pending list: 3 SCB_CONTROL[0x40] SCB_SCSIID[0x57] SCB_LUN[0x0] Kernel Free SCB list: 1 0
Untagged Q(5): 3
scsi1:0:5:0: Attempting to queue an ABORT message CDB: 0xa 0x1 0x0 0x0 0x40 0x0 scsi1: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State while idle, at SEQADDR 0x8 Card was paused ACCUM = 0x4, SINDEX = 0x57, DINDEX = 0x26, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x0 SCSIPHASE[0x0] SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1] SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0x0]
SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0] SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xa4] SXFRCTL0[0x80] DFCNTRL[0x0] DFSTATUS[0x89] STACK: 0x0 0x163 0x178 0x3 SCB count = 4 Kernel NEXTQSCB = 2
Card NEXTQSCB = 2 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 0:3 QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Sequencer SCB Info: 0 SCB_CONTROL[0x44] SCB_SCSIID[0x57] SCB_LUN[0x0] SCB_TAG[0x3] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Pending list: 3 SCB_CONTROL[0x40] SCB_SCSIID[0x57] SCB_LUN[0x0] Kernel Free SCB list: 1 0 Untagged Q(5): 3
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(scsi1:A:5:0): Device is disconnected, re-queuing SCB Recovery code sleeping (scsi1:A:5:0): Abort Message Sent (scsi1:A:5:0): SCB 3 - Abort Completed. Recovery SCB completes Recovery code awake aic7xxx_abort returns 0x2002
st0: Error with sense data: <6>st0: Current: sense key: Unit Attention Additional sense: Power on, reset, or bus device reset occurred
Im interested in hearing what people can suggest to try and resolve this.
-- There is no gravity the world sucks. - William Gibson - Pattern Recognition
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: IO Errors backing up to new LTO3,
Andrew Best <=
|
|
|