Re: mutiple network interfaces
2007-10-13 12:22:07
Krahn, Anderson schrieb:
How do I tell Amanda to use a specific network interface if 2 exist on
the system.
For instance I would like Amanda to only use the ce4 interface..
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.20.1.181 netmask ffff0000 broadcast 10.20.255.255
ether 0:3:ba:9a:4f:6f
ce4: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 172.23.1.73 netmask ffffff00 broadcast 172.23.1.255
ether 0:3:ba:9a:4f:6f
Thanks,
Anderson
Simply use different DNS-Names( e.g. "servername-production" for the ip
of ce0 and "servername-backup" for the ip of ce4). This is our solution
in the past four years and it works like a charme!!
Michael
|
|
|