C2 Jukebox with LTO3 drive
2006-04-29 09:39:51
Hi y'all,
I'm running Solaris 9 with Amanda 2.4.4 (hoping to find the time
to upgrade soon, but its working great), MTX is v 1.2.17rel
We have been running the data to a StorEdge L9 jukebox with LTO tapes.
We are in process of installing a StorEdge C2 jukebox with an LTO3 tape.
We see the new tape drive at /dev/rmt/2, but do not have a device
file for the jukebox. Quantum says that its just offset by the LUN
number, SUN says to install Legato or Netbackup or something so I
have a passthrough driver.
Have any of you installed this jukebox ? Do I need the additional
software in order to create a proper device file for the jukebox ?
The StorEdge L9 jukebox has a sepate scsi id from its tape drive
and I'm able to see a device in directory /dev/scsi/changer/ but
this is not the case with the C2. I'm uncertain how the L9 changer
device was created.
thank you,
Brian
---
Brian R Cuttler brian.cuttler AT wadsworth DOT org
Computer Systems Support (v) 518 486-1697
Wadsworth Center (f) 518 473-6384
NYS Department of Health Help Desk 518 473-0773
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- C2 Jukebox with LTO3 drive,
Brian Cuttler <=
|
|
|