Hello all,
I have found some errors that I get on my tape drive, I know
this in not exactly an Amanda issue but seeing how some of you have experience with
the QUANTUM DLT*000 drive I thought I would ask. This is on a FreeBSD 4.7-RELEASE
system. Thanks.
Jay
dmesg output
sa0 at ahc0 bus 0 target 1 lun 0
sa0: <QUANTUM DLT7000 2565> Removable Sequential
Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
ch0 at ahc0 bus 0 target 3 lun 0
ch0: <ADIC VLS DLT 0305> Removable Changer SCSI-2
device
ch0: 3.300MB/s transfers
ch0: 7 slots, 1 drive, 1 picker, 1 portal
(sa0:ahc0:0:1:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0
(sa0:ahc0:0:1:0): MEDIUM ERROR info:2 csi:0,0,1,40 asc:c,0
(sa0:ahc0:0:1:0): Write error
(sa0:ahc0:0:1:0): failed to write terminating filemark(s)
(sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0
0 0
(sa0:ahc0:0:1:0): ABORTED COMMAND info:ffffa000 csi:0,0,1,40
asc:44,89
(sa0:ahc0:0:1:0): Vendor Specific ASCQ
(sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0
0 0
(sa0:ahc0:0:1:0): ABORTED COMMAND csi:0,0,1,40 asc:44,89
(sa0:ahc0:0:1:0): Vendor Specific ASCQ
(sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0
0 0
(sa0:ahc0:0:1:0): ABORTED COMMAND info:ffffa000 csi:0,0,1,40
asc:44,89
(sa0:ahc0:0:1:0): Vendor Specific ASCQ
(sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0
0 0
(sa0:ahc0:0:1:0): ABORTED COMMAND info:2000 csi:0,0,1,40
asc:44,89
(sa0:ahc0:0:1:0): Vendor Specific ASCQ
(sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0
0 0
(sa0:ahc0:0:1:0): ABORTED COMMAND csi:0,0,1,40 asc:44,89
(sa0:ahc0:0:1:0): Vendor Specific ASCQ
(sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0
0 0
(sa0:ahc0:0:1:0): ABORTED COMMAND info:ffffa000 csi:0,0,1,40
asc:44,89
(sa0:ahc0:0:1:0): Vendor Specific ASCQ
(sa0:ahc0:0:1:0): tape is now frozen- use an OFFLINE, REWIND
or MTEOM command to clear this state.