RE: change tapes problem
2003-09-17 08:39:28
I changed the runtapes to 5 and it still will not change tapes. IT
fills up the first one and then runs out of tape. I am wondering why the
next tape it says it needs to use is "a new tape" instead of a tape
label.
Ray
-----------------------------------------------------------------------
These dumps were to tape daily24.
*** A TAPE ERROR OCCURRED: [[new tape not found in rack]].
Some dumps may have been left in the holding disk.
Run amflush to flush them to tape.
The next 5 tapes Amanda expects to used are: a new tape, a new tape, a
new tape, a new tape, a new tape.
FAILURE AND STRANGE DUMP SUMMARY:
imgsrv01 /data/mmsrv03 lev 0 FAILED [out of tape]
imgsrv01 /data/mmsrv03 lev 0 FAILED ["data write: Broken pipe"]
imgsrv01 /data/mmsrv03 lev 0 FAILED [dump to tape failed]
imgsrv01 /data/imgsrv02/mmsrv lev 1 FAILED [no more holding disk
space]
imgsrv01 /data/imgsrv02/thumbnails lev 1 FAILED [no more holding
disk space]
STATISTICS:
Total Full Daily
-------- -------- --------
Estimate Time (hrs:min) 2:31
Run Time (hrs:min) 4:49
Dump Time (hrs:min) 1:23 1:17 0:06
Output Size (meg) 21639.8 20923.3 716.5
Original Size (meg) 21639.8 20923.3 716.5
Avg Compressed Size (%) -- -- -- (level:#disks
...)
Filesystems Dumped 2 1 1 (1:1)
Avg Dump Rate (k/s) 4475.4 4656.3 2096.3
Tape Time (hrs:min) 1:19 1:17 0:03
Tape Size (meg) 21639.8 20923.3 716.5
Tape Used (%) 61.8 59.8 2.0 (level:#disks
...)
Filesystems Taped 2 1 1 (1:1)
Avg Tp Write Rate (k/s) 4663.0 4656.2 4869.7
USAGE BY TAPE:
Label Time Size % Nb
daily24 1:19 21639.8 61.8 2
FAILED AND STRANGE DUMP DETAILS:
/-- imgsrv01 /data/mmsrv03 lev 0 FAILED ["data write: Broken pipe"]
sendbackup: start [imgsrv01:/data/mmsrv03 level 0]
sendbackup: info BACKUP=/usr/sbin/ufsdump
sendbackup: info RECOVER_CMD=/usr/sbin/ufsrestore -f... -
sendbackup: info end
| DUMP: Writing 32 Kilobyte records
| DUMP: Date of this level 0 dump: Wed Sep 17 01:20:24 2003
| DUMP: Date of last level 0 dump: the epoch
| DUMP: Dumping /dev/rdsk/c5t5d0s6 (imgsrv01:/data) to standard
output.
| DUMP: Mapping (Pass I) [regular files]
| DUMP: Mapping (Pass II) [directories]
| DUMP: Estimated 25221008 blocks (12314.95MB) on 0.18 tapes.
| DUMP: Dumping (Pass III) [directories]
| DUMP: Dumping (Pass IV) [regular files]
| DUMP: 17.57% done, finished in 0:46
| DUMP: 40.71% done, finished in 0:29
| DUMP: 63.68% done, finished in 0:17
| DUMP: 86.56% done, finished in 0:06
\--------
NOTES:
planner: Last full dump of imgsrv01:/data/mmsrv03 on tape overwritten
in 1 run.
planner: Last full dump of imgsrv01:/data/imgsrv02/thumbnails on tape
overwritten in 1 run.
planner: Last full dump of imgsrv01:/data/imgsrv02/mmsrv on tape
overwritten in 1 run.
taper: tape daily24 kb 33948736 fm 3 writing file: short write
DUMP SUMMARY:
DUMPER STATS TAPER STATS
HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS
KB/s
-------------------------- ---------------------------------
------------
imgsrv01 -ata/dbserv 0 2142544021425440 -- 76:414656.3
76:414656.2
imgsrv01 -rv02/mmsrv 1 FAILED
---------------------------------------
imgsrv01 -thumbnails 1 FAILED
---------------------------------------
imgsrv01 -ta/mmsrv03 0 FAILED
---------------------------------------
imgsrv01 -2/batchsrv 1 733696 733696 -- 5:502096.3
2:314869.7
(brought to you by Amanda version 2.4.4p1)
-----Original Message-----
From: owner-amanda-users AT amanda DOT org
[mailto:owner-amanda-users AT amanda DOT org] On Behalf Of Joshua Baker-LePain
Sent: Tuesday, September 16, 2003 4:19 PM
To: Raymond Keckler
Cc: amanda-users AT amanda DOT org
Subject: Re: change tapes problem
On Tue, 16 Sep 2003 at 3:53pm, Raymond Keckler wrote
> Software
>
> Solaris 8
> Amanda 2.4.4p1
> Chg-zd-mtx
>
> I have them listed in the disklist file.
>
> Imgsrv01 /data1 nocomp-user
> Imgsrv01 /data2 nocomp-user
> Imgsrv01 /data3 nocomp-user
> Imgsrv01 /data4 nocom-user
>
> The problem:
>
> It backs up everything until if fills one tape and then
> gives errors for the rest.
>
> It will not go to the next tape and continue with the next directory.
>
> How do I back up 200 gigs without having to manually change the tapes?
Do you have runtapes > 1 setup in amanda.conf? What are the relevant
changer settings in amanda.conf?
--
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University
|
|
|