time to go in amstatus
2003-05-22 05:12:03
Hi list,
anyone knows where to look (besides amstatus) for the remaining time of
a backup process?
It's been like 2 hours and I keep getting the exact same info from
amstatus, and tape is still being used...
Thx,
Fefo
-------------------------------------------------------------------------
Using /var/lib/amanda/DailySet1/amdump from Wed May 21 22:45:00 CEST 2003
localhost:/ 1 32k finished (23:09:25)
localhost:/boot 1 32k finished (23:08:53)
localhost:/home.new 111543000k wait for dumping
localhost:/usr 1 32k finished (23:09:51)
localhost:/usr/local 1 32k finished (23:09:10)
localhost:/usr/local/software 1 32k finished (23:10:02)
rc1.server:/ 1 310400k finished (0:05:57)
rc1.server:/boot 1 32k finished (23:08:56)
rc1.server:/home 011443895k dumping to tape (0:05:58)
SUMMARY part real estimated
size size
partition : 9
estimated : 9 23703886k
failed : 0 0k ( 0.00%)
wait for dumping: 1 11543000k ( 48.70%)
dumping to tape : 1 11443895k ( 48.28%)
dumping : 0 0k 0k ( 0.00%) ( 0.00%)
dumped : 7 310592k 716991k ( 43.32%) ( 1.31%)
wait for writing: 0 0k 0k ( 0.00%) ( 0.00%)
writing to tape : 0 0k 0k ( 0.00%) ( 0.00%)
failed to tape : 0 0k 0k ( 0.00%) ( 0.00%)
taped : 7 310592k 716991k ( 43.32%) ( 1.31%)
3 dumpers idle : not-idle
taper writing, tapeq: 0
network free kps: 1970
holding space : 5242880k (100.00%)
dumper0 busy : 0:00:27 ( 0.81%)
dumper1 busy : 0:54:59 ( 96.26%)
taper busy : 0:02:11 ( 3.82%)
0 dumpers busy : 0:02:05 ( 3.67%) no-diskspace: 0:01:53 ( 90.43%)
start-wait: 0:00:12 ( 9.57%)
1 dumper busy : 0:54:36 ( 95.59%) no-diskspace: 0:54:21 ( 99.54%)
start-wait: 0:00:15 ( 0.46%)
2 dumpers busy : 0:00:25 ( 0.74%) no-diskspace: 0:00:22 ( 89.95%)
start-wait: 0:00:02 ( 10.05%)
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- time to go in amstatus,
Fernando Pintabona <=
|
|
|