Hi

Next issue is the drive slot...
My tape device is /dev/rmt/1n, so I've set driveslot=0 in changer.conf
(I also tried it set to 1, same result, except it said drive slot 1 in the
error message)

Here's the log

bash-2.03# cat /tmp/amanda/chg-zd-mtx.20030513183630.debug
chg-zd-mtx: debug 1 pid 4712 ruid 4027 euid 4027: start at Tue May 13
18:36:30 2003
18:36:31 Arg info:
         $# = 2
         $0 = "./chg-zd-mtx"
         $1 = "-slot"
         $2 = "current"
18:36:31 Running: mtx status
18:36:31 Exit code: 0
         Stdout:
  Storage Changer /dev/scsi/changer/c1t6d0:1 Drives, 10 Slots ( 0
Import/Export )
Data Transfer Element 0:Full (Unknown Storage Element Loaded)
      Storage Element 1:Full
      Storage Element 2:Full
      Storage Element 3:Full
      Storage Element 4:Full
      Storage Element 5:Full
      Storage Element 6:Full
      Storage Element 7:Full
      Storage Element 8:Full
      Storage Element 9:Empty
      Storage Element 10:Full
18:36:31 Config info:
         firstslot = "1"
         lastslot = "9"
         cleanslot = "10"
         cleancycle = "120"
         offline_before_unload = "0"
         unloadpause = "0"
         autoclean = "0"
         autocleancount = "99"
         havereader = "0"
         driveslot = "0"
         poll_drive_ready = "3"
         max_drive_wait = "120"
18:36:31 LOADSLOT -> load drive 0 (/dev/rmt/1n) from slot current
18:36:31 Exit (2) -> <none> could not determine current slot, are you sure
your drive slot is 0

Any help would be very gratefully received.

Thanks

Nige