Amanda-Users

RE: speed of amdump

2003-01-24 10:13:08
Subject: RE: speed of amdump
From: donald.ritchey AT exeloncorp DOT com
To: gene_heskett AT iolinc DOT net, smcdermott AT questra DOT com, amanda-users AT amanda DOT org
Date: Fri, 24 Jan 2003 08:31:19 -0600
And if any of us can RELIABLY exceed 30 percent usage on 
an Ethernet network, I want to see it.

For networks, plan on using about 10 percent of the available
bandwidth in your capacity planning and you should be safe.

For 10 Mbit Ethernet, figure 100 KB/sec, 
for 100 Mbit Ethernet, figure 1 MB/sec,
for 1 Gbit Ethernet, figure 10 MB/sec.

If you are using a network switch instead of a hub, that helps, 
but it is still better to be on the safe side and plan 
conservatively.

As always, your mileage may vary ...

Don Ritchey
Donald.Ritchey AT exeloncorp DOT com


-----Original Message-----
From: Gene Heskett [mailto:gene_heskett AT iolinc DOT net]
Sent: Friday, January 24, 2003 7:35 AM
To: Scott Mcdermott; amanda-users AT amanda DOT org
Subject: Re: speed of amdump


On Friday 24 January 2003 05:35, Scott Mcdermott wrote:
>dalton on Fri 24/01 09:59 +0100:
>> But we have a 100mbit LAN, so there should be 10240 kbps, thats
>> right?
>
>just being picky,
>
>$ bc -ql
>100 * (2^10)^2 / 8 / 2^10
>12800.00000000000000000000
>
>:) of course if you actually hit that wire speed I'll be amazed.
>
I don't believe this is quite correct.  Thats a serial protocol, and 
AFAIK it still uses start and stop bits, so the real /8/ divisor 
above should probably be /10/, giving a 10 megabytes or 100 
megabaud a second rate, hence the naming convention.

-- 
Cheers, Gene
AMD K6-III@500mhz 320M
Athlon1600XP@1400mhz  512M
99.22% setiathome rank, not too shabby for a WV hillbilly


************************************************************************
This e-mail and any of its attachments may contain Exelon Corporation
proprietary information, which is privileged, confidential, or subject 
to copyright belonging to the Exelon Corporation family of Companies. 
This e-mail is intended solely for the use of the individual or entity 
to which it is addressed.  If you are not the intended recipient of this 
e-mail, you are hereby notified that any dissemination, distribution, 
copying, or action taken in relation to the contents of and attachments 
to this e-mail is strictly prohibited and may be unlawful.  If you have 
received this e-mail in error, please notify the sender immediately and 
permanently delete the original and any copy of this e-mail and any 
printout. Thank You.
************************************************************************


<Prev in Thread] Current Thread [Next in Thread>