On Mon, 18 Nov 2002 11:42:11 -0500
Galen Johnson <gjohnson AT trantor DOT org> wrote:
> Perhaps the barcode device has different ownership/permissions/group
> than the rest of the devices? I don't have a barcode reader device so
> I'm just throwing out possiblities...
>
> =G=
Not really, the barcodes are being read trough the same device which is used to
controll the library, and that one is readable / writable by sys group.
Also, the chg-scsi is actually able to read the barcodes (visible in debug) but
trashes somewhere past that point. I did 2 x trusses, one for root and one for
amanda, this is what I see when looking at the area near crash:
Amanda User:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----cut--------
write(10, " 1 0 3 7 6 3 5 5 9 7 : #".., 50) = 50
time() = 1037635597
write(10, " 1 0 3 7 6 3 5 5 9 7 : #".., 37) = 37
time() = 1037635597
write(10, " 1 0 3 7 6 3 5 5 9 7 : d".., 51) = 51
time() = 1037635597
write(10, " 1 0 3 7 6 3 5 5 9 7 : #".., 48) = 48
open64("/etc/amanda/daily.scsi/tape0-slot", O_RDONLY) = 4
fstat64(4, 0xFFBFF728) = 0
fstat64(4, 0xFFBFF5D0) = 0
ioctl(4, TCGETA, 0xFFBFF6B4) Err#25 ENOTTY
read(4, " 0\n", 8192) = 2
llseek(4, 0xFFFFFFFFFFFFFFFF, SEEK_CUR) = 1
close(4) = 0
time() = 1037635597
write(10, " 1 0 3 7 6 3 5 5 9 7 : #".., 31) = 31
time() = 1037635597
write(10, " 1 0 3 7 6 3 5 5 9 7 : u".., 57) = 57
time() = 1037635597
write(10, " 1 0 3 7 6 3 5 5 9 7 : u".., 64) = 64
time() = 1037635597
time() = 1037635597
time() = 1037635597
time() = 1037635597
time() = 1037635597
time() = 1037635597
Incurred fault #6, FLTBOUNDS %pc = 0x000182E4
siginfo: SIGSEGV SEGV_MAPERR addr=0x00000020
Received signal #11, SIGSEGV [default]
siginfo: SIGSEGV SEGV_MAPERR addr=0x00000020
----end--------
Root User:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----cut--------
write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 50) = 50
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 37) = 37
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : d".., 51) = 51
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 48) = 48
open64("/etc/amanda/daily.scsi/tape0-slot", O_RDONLY) = 4
fstat64(4, 0xFFBFF718) = 0
fstat64(4, 0xFFBFF5C0) = 0
ioctl(4, TCGETA, 0xFFBFF6A4) Err#25 ENOTTY
read(4, " 0\n", 8192) = 2
llseek(4, 0xFFFFFFFFFFFFFFFF, SEEK_CUR) = 1
close(4) = 0
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 31) = 31
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : u".., 57) = 57
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : u".., 64) = 64
time() = 1037635622
time() = 1037635622
time() = 1037635622
time() = 1037635622
time() = 1037635622
time() = 1037635622
time() = 1037635622
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 42) = 42
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 34) = 34
time() = 1037635622
write(10, " S C S I _ E x e c u t e".., 38) = 38
time() = 1037635622
write(10, " 0 0", 3) = 3
time() = 1037635622
write(10, " 0 0", 3) = 3
time() = 1037635622
write(10, " 0 0", 3) = 3
time() = 1037635622
write(10, " 0 0", 3) = 3
time() = 1037635622
write(10, " 0 0", 3) = 3
time() = 1037635622
write(10, " 0 0", 3) = 3
time() = 1037635622
write(10, "\n", 1) = 1
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 33) = 33
open64("/dev/rmt/0cbn", O_RDWR|O_NDELAY) = 4
ioctl(4, 0x04C9, 0xFFBFF9F0) = 0
close(4) = 0
time() = 1037635622
time() = 1037635622
write(10, " 1 0 3 7 6 3 5 6 2 2 : #".., 46) = 46
time() = 1037635622
alarm(0) = 0
sigaction(SIGALRM, 0xFFBFF9C0, 0xFFBFFA70) = 0
sigprocmask(SIG_BLOCK, 0xFFBFFA60, 0xFFBFFA50) = 0
alarm(1) = 0
Received signal #14, SIGALRM, in sigsuspend() [caught]
sigsuspend(0xFFBFFA40) Err#4 EINTR
setcontext(0xFFBFF728)
alarm(0) = 0
sigprocmask(SIG_UNBLOCK, 0xFFBFFA60, 0x00000000) = 0
sigaction(SIGALRM, 0xFFBFF9C0, 0x00000000) = 0
----cut--------
|