I also just tried running the chg-scsi script by itself and I get the
following error...

 bash$./chg-scsi -info
chg-scsi: could not open conf file "amanda.conf": No such file or directory

Which is cleary in the /etc/amanda/DailySet1/ directory.

Chris Bourne
Systems/Network Administrator
Xapnet
Phone (510)655-9771
Fax (510)655-9775
http://www.xapnet.com
----- Original Message -----
From: "Chris Bourne" <cbourne AT xapnet DOT com>
To: <amanda-users AT amanda DOT org>
Sent: Wednesday, August 28, 2002 2:48 PM
Subject: Re: could not get changer info


> I have tried other scripts and have had no success but this is the one I
> have put the most time into because I know the machine uses scsi commands
> Chris Bourne
> Systems/Network Administrator
> Xapnet
> Phone (510)655-9771
> Fax (510)655-9775
> http://www.xapnet.com
> ----- Original Message -----
> From: "Chris Johnson" <chris AT sebis DOT com>
> To: "Chris Bourne" <cbourne AT xapnet DOT com>; "amanda-users"
> <amanda-users AT amanda DOT org>
> Sent: Wednesday, August 28, 2002 2:34 PM
> Subject: Re: could not get changer info
>
>
> > Chris,
> >     Have you tried any other scripts? Has this worked before or are you
> > trying to get the changer to work for the first time?
> >     For my ADIC fastor 4000 the changer is /dev/sg0 and the drive is
> > /dev/st0. I've been using the chg-zd-mtx script.
> > I hope that this helps.
> > chrisj
> >
> > Chris Bourne wrote:
> >
> > >
> > > Hello,
> > >
> > >    I need help with figuring out why amanda is giving me these errors.
> > > First off I am using Sony 20/40G dgd 150p tapes on a Dell powervault
> > > 120T DDS-4 autoloader on RedHat 7.2. I am using a chg-scsi config..
> > >
> > >
> > >
> > > Does anyone know what this error means
> > >
> > >
> > >
> > > "could not get changer info" which I got from the output of this
> > > command......
> > >
> > >
> > >
> > > bash-2.05$ /usr/sbin/amtape DailySet1 label DailySet101
> > >
> > >
> > > amtape: scanning for tape with label DailySet101
> > > amtape: could not get changer info: open: /dev/sg1: Success
> > >
> > > I cannot get the tapes to change.
> > >
> > >  Any help thanks,
> > >
> > >
> > >
> > > Chris
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Chris Bourne
> > > Systems/Network Administrator
> > > Xapnet
> > > Phone (510)655-9771
> > > Fax (510)655-9775
> > > http://www.xapnet.com
> > >
> >
> >
> >
> >
>