Hi,

Used it with adding slots, io slots and drives to lib and worked. Just make 
sure lib is not being used and all drives are empty at the time of running the 
audit. Co-worker tried it with lib in use and drives mounted and ended up with 
one big mess to solve :D

Kind regards,

Karel

----- Oorspronkelijk bericht -----
Van: Huebner, Andy <andy.huebner AT ALCON DOT COM>
Verzonden: zondag 21 april 2013 10:21
Aan: ADSM-L AT VM.MARIST DOT EDU
Onderwerp: Re: [ADSM-L] Library manager question

We have used the refreshstate option several times with our VTLs when we add 
slots.  It works well.
TSM 6.2

Andy Huebner

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Remco Post
Sent: Saturday, April 20, 2013 10:32 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Library manager question

Haven't tried it, but I'm quite eager to hear what from you once you're done. 
It doesn't seem to be very complicated to implement and I've always wondered 
why TSM requires a restart when changing anything in the library configuration 
(or deleting all paths, all drives the library and then rebuilding everything, 
imagine doing that on a LM or a TSM server that shares 18 drives with 9 NAS 
filers ;-) )

On 19 apr. 2013, at 15:11, Zoltan Forray <zforray AT VCU DOT EDU> wrote:

> For this issue of tape library replacements/swaps (since we are about 
> to do this), has anyone tried the AUDIT LIBRARY command with 
> REFRESHSTATE=YES?  I stumbled upon this new option in this doc:
> 
> http://www-01.ibm.com/support/docview.wss?uid=swg21203271
> 
> On Thu, Apr 18, 2013 at 2:02 PM, Remco Post <r.post AT plcs DOT nl> wrote:
> 
>> On 18 apr. 2013, at 16:50, "Heikel, Cory" <cheikel AT HMC.PSU DOT EDU> wrote:
>> 
>>> I am trying to bring up a library manager to share my 3584 between 2 
>>> tsm
>> servers. My question is this:
>>> 
>>> How do I tell the library client that all the tapes for a certain
>> storage pool are now "contained", for lack of a better word, on the 
>> library manager? If it were on the same server I would just run a 
>> checkin, but I cannot run a checkin on a library client. Perhaps I am 
>> missing something fundamental...
>> 
>> check the tapes into the library manager as private, then run an 
>> audit libr on the lib from the library client to take ownership.
>> 
>> 
>> 
>>> Cory L Heikel
>>> Business Continuity Team
>>> Hershey Medical Center
>>> (717)531-7972
>>> "Next week there ca


[Het originele bericht is niet volledig opgenomen]