The install readme says use ultrium or ultriumc.

Also, as Richard mentioned, look at the microcode on the drives.

Cheers, Suad
--
On Wed, May 30, 2001 at 02:18:23PM +0100, Fab System wrote:
On Wed, May 30, 2001 at 02:18:23PM +0100, Fab System wrote:
> All
>
> We have 4 LTO drives in a 3584 libary which is connected using a SAN Data
> Gateway. When I look at the device class for the library there is an option
> to set "Recording Format" and this is currently set to DRIVE. The options
> are DRIVE/ ULTRIUM/ULTRIUMC.
>
> The reason I ask the question is because the LTO drives seem to be very slow
> compared to the 3590's we have in our other libraries.
>
> Any help would be appreciated.
>
> Cheers
>
> Sean Dudding
>
> __________________________________________________________________________________________
>
> Registered Office:
> Marks and Spencer p.l.c
> Michael House, Baker Street,
> London, W1U 8EP
> Registered No. 214436 in England and Wales.
>
> Telephone  (020) 7935 4422
> Facsimile  (020) 7487 2670
>
> www.marksandspencer.com
>
> Please note that electronic mail may be monitored.
>
> This e-mail is confidential. If you received it by mistake, please let us 
> know and then
> delete it from your system; you should not copy, disclose, or distribute its 
> contents to
> anyone nor act in reliance on this e-mail, as this is prohibited and may be 
> unlawful
> _________________________________________________________________________________________