Re: 3575 configuration
1998-09-10 08:14:15
On Thu, 10 Sep 1998, Bill Smoldt wrote:
> Works both ways actually. You go back into SMIT and configure the ADSM
> library and it shows as both devices, lb0 and rmt0.smc. You can delete the
> latter. Or, if you choose to set the library up differently, the control
> device can be /dev/rmt1.smc, /dev/rmt2.smc, etc.
>
> However, the original question was whether it appears as a single library.
> It does, regardless of which device you choose for configuration.
The 3575 Model 2 can be configured as mulitple logical libraries as a
customer option. The original Model 1 could not. Therefore, with a Model
2, it can be one library, or more than one library...
Steve (unVMix Systems Programmer/Dude) Roder
(tkssteve AT ubvm.cc.buffalo DOT edu | tkssteve AT acsu.buffalo DOT edu |
(716)645-3564 ,
| http://ubvm.cc.buffalo.edu/~tkssteve)
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- 3575 configuration, Bo Ossinger
- Re: 3575 configuration, Bill Smoldt
- Re: 3575 configuration, Dirk Kastens
- Re: 3575 configuration, Bill Smoldt
- Re: 3575 configuration,
Steven P Roder <=
- Re: 3575 configuration, Ray Pratts
- Re: 3575 configuration, Ian Blair
- Re: 3575 configuration, Peter Gathercole
- Re: 3575 configuration, Jennifer Davis
- 3575 configuration, ADSM : Dist Stor Manager [mailto:ADSM-L
- Re: 3575 configuration, ADSM : Dist Stor Manager [mailto:ADSM-L
|
|
|