ADSM-L

Re: 3575 configuration

1998-09-10 05:33:38
Subject: Re: 3575 configuration
From: Bill Smoldt <smoldt AT STORSOL DOT COM>
Date: Thu, 10 Sep 1998 03:33:38 -0600
Works both ways actually.  You go back into SMIT and configure the ADSM
library and it shows as both devices, lb0 and rmt0.smc.  You can delete the
latter.  Or, if you choose to set the library up differently, the control
device can be /dev/rmt1.smc, /dev/rmt2.smc, etc.

However, the original question was whether it appears as a single library.
It does, regardless of which device you choose for configuration.

Bill

<Prev in Thread] Current Thread [Next in Thread>