Re: checking in new tapes on 3575
1998-08-25 16:29:34
Johan,
I think I have the same library a 3575 with MagStar 3570 drives.
I figured out the easiest way to get the tapes labeled is to do it through
the wizard (this is on an NT server). I am in the process of doing this so
we'll see what happens. After it is finished labeling I intend on doing the
checkin with checkl=barcode, hopefully this will work (I got this from an
ADSM Users Group Meeting I attended this morning). I'll let you know as
soon as it's complete.
Thanks for the input.
Rose
> -----Original Message-----
> From: Johan Pol [SMTP:JPol AT NL.IBM DOT COM]
> Sent: Tuesday, August 25, 1998 12:18 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: checking in new tapes on 3575
>
> Rose,
>
> Did you format the tapes first ?
>
> I have the same problem with my MagStar 3570 which uses the same tapeunit
> drives.
>
> If you format the tapes, you can try to use the LABEL LIBV command within
> ADSM
> version 3.
> It won't work by me, i find out that i have to use the DSMLABEL.EXE
> utility.
>
> Does someone have the same problem ????
>
> with kind regards, / met vriendelijke groeten,
> Johan Pol
> Boerhaavelaan 11 - 2713 HA - Zoetermeer - Tel. (+31)79 3223051 - Fax.
> (+31)79
> 3213989
> Internet :JPol AT nl.ibm DOT com / johan.pol AT xerion.be.philips DOT com
>
>
>
> ADSM-L AT VM.MARIST DOT EDU on 24-08-98 18:18:50
> Please respond to ADSM-L AT VM.MARIST DOT EDU
> To: ADSM-L AT VM.MARIST DOT EDU
> cc:
> Subject: checking in new tapes on 3575
>
>
> Hi all,
>
> I have a Data General Aviion with a Clariion 3000 - 30 disk raid array
> connected to an IBM 3575 - L12, which we just upgraded to an L18 on
> Friday.
>
> The problem is when I try to check the new tapes in I get the error I have
> added below. The command that I am typing is: checkin libv warf stat=scr
> search=yes
>
> If anyone has any thoughts on this matter I would greatly appreciate the
> input.
>
>
> 08/24/1998 07:33:39 ANR8302E I/O error on drive MT0 (MT0.0.0.1)
> (OP=READ,
> CC=403, KEY=08, ASC=14, ASCQ=01,
>
>
> SENSE=F0.00.08.00.00.00.50.48.00.00.00.00.14.01.FF.0A.36-
>
> .33.00.00.00.09.01.91.00.45.50.04.00.00.08.00.00.33.19.0-
>
> 0.54.33.35.10.02.33.3D.00.00.00.00.00.00.00.00.00.01.00.-
> 00.00.2C.90.00.00.00.00.00.00.,
> Description=Media
>
> failure). Refer to Appendix B in the 'Messages'
> manual
> for recommended action.
>
> 08/24/1998 07:33:39 ANR8357I Error reading label of volume in drive
> MT0
>
> (MT0.0.0.1) of library WARF.
>
> 08/24/1998 07:34:14 ANR8302E I/O error on drive MT1 (MT1.0.0.1)
> (OP=READ,
> CC=403, KEY=08, ASC=14, ASCQ=01,
>
>
> SENSE=F0.00.08.00.00.00.50.48.00.00.00.00.14.01.FF.0B.36-
>
> .33.00.10.00.09.01.91.00.45.50.04.00.00.08.00.00.33.19.0-
>
> 0.54.33.35.10.02.33.3D.00.00.00.00.00.00.00.00.00.01.00.-
> 00.00.2C.90.00.00.00.00.00.00.,
> Description=Media
>
> failure). Refer to Appendix B in the 'Messages'
> manual
> for recommended action.
>
> 08/24/1998 07:34:14 ANR8357I Error reading label of volume in drive
> MT1
>
> (MT1.0.0.1) of library WARF.
>
>
> Thanks,
> Rose M. Campbell
> Data Storage Manager
> Joint National Test Facility
> 720 Irwin Avenue
> Schriever AFB, CO 80912-7200
> 719-567-8454
> 719-567-8288 (fax)
> email - rose AT jntf.osd DOT mil
>
>
>
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- checking in new tapes on 3575, Campbell, Rose
- Re: checking in new tapes on 3575, Campbell, Rose
- Re: checking in new tapes on 3575, James SPORER
- Re: checking in new tapes on 3575, Richard Sims
- Re: checking in new tapes on 3575, Campbell, Rose
- Re: checking in new tapes on 3575, Richard Sims
- Re: checking in new tapes on 3575, Ferron Brown
- Re[2]: checking in new tapes on 3575, James SPORER
- Re: checking in new tapes on 3575, Johan Pol
- Re: checking in new tapes on 3575,
Campbell, Rose <=
- Re: checking in new tapes on 3575, Brenda Burns
- Re: checking in new tapes on 3575, Peter Gathercole
- Re: checking in new tapes on 3575, Jason Morgan
|
|
|