Mannans
ADSM.ORG Member
Hi There
I currently run TSM 5.5.2 on a windows 2003 sp2 servers and 8.1.1 version of Ontap on Netapp filers . The exchange data is configured on Netapp as a lun and presented as a drive to the exchange servers. I backup from the Netapp filers using NDMP at the volume level. Ive been told that this is not exchnage aware and that i can backup the snapshots (which are mirrored to this filer which are exchange aware ) by using a virtual filemapping to the most recent snapshot. I have updated the vitual filemapping to :-
Node Name Virtual Filespace Filespace Path Hexadecimal
Mapping Name Name Path?
--------------- --------------------- ----------- ------------------------- -----------
UKLONSAN911_Monthly /ex_vol_sg08log /vol/ex_vol_sg08log /.snapshot/exchsnap_uklonmcs002_recent No
However when i generate a full backup
ANR2017I Administrator ADMIN issued command: BACKUP NODE
UKLONSAN911_MONTHLY /ex_vol_sg08log wait=no
mgmtclass=DAILY toc=yes mode=full (SESSION: 254444)
i get the following error message not long after a tape has been requested.......any ideas?
ANR2017I Administrator MANNANS issued command: BACKUP NODE uklonsan911_monthly
/ex_vol_sg08log mode=full toc=yes
ANR0984I Process 226 for BACKUP NAS (FULL) started in the BACKGROUND at
10:42:07.
ANR1063I Full backup of NAS node UKLONSAN911_MONTHLY, file system
/ex_vol_sg08log, started as process 226 by administrator MANNANS.
ANR8337I NAS volume E00359L5 mounted in drive DRIVE8 (rst4a).
ANR0513I Process 226 opened output volume E00359L5.
ANR9999D_0353444622 (ndlog.c:120) Thread<91>: NDMPLOG: E DATA: Backup
terminated: backup configuration failure (2) on RPC error: ERROR: B
ANR9999D Thread<91> issued message 9999 from:
ANR9999D_2446363296 (ndlog.c:120) Thread<91>: NDMPLOG: E DUMP: ERROR: stat on
FILESYSTEM path /vol/ex_vol_sg08log/.snapshot/exchsnap_uklo
ANR9999D Thread<91> issued message 9999 from:
I currently run TSM 5.5.2 on a windows 2003 sp2 servers and 8.1.1 version of Ontap on Netapp filers . The exchange data is configured on Netapp as a lun and presented as a drive to the exchange servers. I backup from the Netapp filers using NDMP at the volume level. Ive been told that this is not exchnage aware and that i can backup the snapshots (which are mirrored to this filer which are exchange aware ) by using a virtual filemapping to the most recent snapshot. I have updated the vitual filemapping to :-
Node Name Virtual Filespace Filespace Path Hexadecimal
Mapping Name Name Path?
--------------- --------------------- ----------- ------------------------- -----------
UKLONSAN911_Monthly /ex_vol_sg08log /vol/ex_vol_sg08log /.snapshot/exchsnap_uklonmcs002_recent No
However when i generate a full backup
ANR2017I Administrator ADMIN issued command: BACKUP NODE
UKLONSAN911_MONTHLY /ex_vol_sg08log wait=no
mgmtclass=DAILY toc=yes mode=full (SESSION: 254444)
i get the following error message not long after a tape has been requested.......any ideas?
ANR2017I Administrator MANNANS issued command: BACKUP NODE uklonsan911_monthly
/ex_vol_sg08log mode=full toc=yes
ANR0984I Process 226 for BACKUP NAS (FULL) started in the BACKGROUND at
10:42:07.
ANR1063I Full backup of NAS node UKLONSAN911_MONTHLY, file system
/ex_vol_sg08log, started as process 226 by administrator MANNANS.
ANR8337I NAS volume E00359L5 mounted in drive DRIVE8 (rst4a).
ANR0513I Process 226 opened output volume E00359L5.
ANR9999D_0353444622 (ndlog.c:120) Thread<91>: NDMPLOG: E DATA: Backup
terminated: backup configuration failure (2) on RPC error: ERROR: B
ANR9999D Thread<91> issued message 9999 from:
ANR9999D_2446363296 (ndlog.c:120) Thread<91>: NDMPLOG: E DUMP: ERROR: stat on
FILESYSTEM path /vol/ex_vol_sg08log/.snapshot/exchsnap_uklo
ANR9999D Thread<91> issued message 9999 from: