TSM Won't Start // DB2 Error

[BDMcGrew]

Hi, Guys!

Had a power failure that ran out my batteries and now TSM won't start, getting a DB2 error. I've googled till there's nothing left to search but DB2 is my weakest strength, so I'm at a loss. Any help would be greatly appreciated!

-brian

Starting dsmserv instance admin ... Succeeded

U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corporation.

ANR7801I Subsystem process ID is 26844.
ANR0900I Processing options file /home/admin/tsminst1/dsmserv.opt.
ANR7814I Using instance directory /home/admin/tsminst1.
ANR4726I The ICC support module has been loaded.
ANR0990I Server restart-recovery in progress.
ANR7859W Error reading from standard input.
ANR0152I Database manager successfully started.
ANR0162W Supplemental database diagnostic information: -1:08001:-30082
([IBM][CLI Driver] SQL30082N Security processing failed with reason "24"
("USERNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
).
ANR1820E The server could not connect to the database manager by using TCP/IP
port 51500.
^C
[root@tsm101 ~]#

 

[RecoveryOne]

Stab in the dark here but perhaps:
http://www-01.ibm.com/support/docview.wss?uid=swg22007298
There's some fix levels listed in the doc. What version/os (AIX/Linux) you running on?

 

[SElias]

Yup .. that is the proper technote, run gsk8ver_64 and make sure your tsm server is either 7.1.7.300 and 8.1.2.000.

And also check the BA client that is on the same machine, if it is 7.1.8 or 7.1.9 or 8.1.2 and above then this could also be seen.

Uninstall the BA client and reinstall 7.1.6.4 or 5 and it should be ok.