philburg2
ADSM.ORG Member
Got a brand new RHEL 6 box, qlogic HBAs, DD890 VTL setup and zoned with LTO1 tapes, and the lin_tape IBM driver setup.
lin_tape - 1.67
qla2xxx - 8.03.01.05.06.0-k8
RHEL - 2.6.32-71.18.1.el6.x86_64
We can see the drives, pull them into the IBM config, but everything disappears on reboot. The IBM directions don't mention anything about any required modprobe or initrd commands, so what's going on?
lin_tape - 1.67
qla2xxx - 8.03.01.05.06.0-k8
RHEL - 2.6.32-71.18.1.el6.x86_64
We can see the drives, pull them into the IBM config, but everything disappears on reboot. The IBM directions don't mention anything about any required modprobe or initrd commands, so what's going on?