raychu65
ADSM.ORG Member
Hi all,
I am trying to connect TSM 5.2.3.3 to TS3100 tape library.
So I am define the following:
DEFINE STORAGE POOL:
define stgpool LTO_SP lto_dev1 maxsize=100G maxscratch=5
DEFINE DEVCLASS:
define devclass lto_dev1 devtype=lto library = ltolib1 format=ultrium3c mountlimit=180 mountretention=5 prefix=ADSM estcapacity=100G
DEFINE LIBRARY:
define library LTOLIB1 libtype=SCSI autolabel=no
DEFINE LIBRARY PATH:
define path FTAB03_SERVER1 LTOLIB1 srctype=server autodetect=yes desttype=library device=lb3.0.0.2
DEFINE DRIVE:
define drive LTOLIB1 LTO_DRV1 serial=autodetect element=autodetect
DEFINE DRIVE PATH:
define path FTAB03_SERVER1 LTO_DRV1 srctype=server autodetect=yes desttype=drive library=LTOLIB1 device=mt4.0.0.2
DEFINE VOLUME:
define volume LTO_SP VOL001 access=readwrite
After I configure the devices and define all the above things, then I perform the backup in the Backup client GUI. However, I got the following error:
"ANS5092S Server out of data storage space"
After that I check the activity log, I got the following errors:
"ANR8302E I/O error on drive LTO_DRV0 (mt4.0.0.2) with volume (OP=OFFL, Error Number=1, CC=0, KEY=05, ASC=53, ASCQ=02, SENSE=70.00.05.00.00.00.00.58.00.00.00.00.53.02.34.00.2C.19,Description=An undetermined error has occurred). Refer to Appendix D in the 'Messages' manual for recommended action.(SESSION: 277)"
"ANR8302E I/O error on drive LTO_DRV0 (mt4.0.0.2) with volume (OP=OFFL, Error Number=1, CC=0, KEY=05, ASC=53, ASCQ=02,
SENSE=70.00.05.00.00.00.00.58.00.00.00.00.53.02.34.00.2C.19,Description=An undetermined error has occurred). Refer to Appendix D in the 'Messages' manual for recommended action.(SESSION: 277)"
"ANR8358E Audit operation is required for library LTOLIB1.(SESSION: 277)"
"ANR1405W Scratch volume mount request denied - no scratch volume available.(SESSION: 277)"
My question is:
1. Why I cannot perform the backup?
2. Is that I forget to set something for this kind of Tape Library (TS3100)?
3. If I really want to perform the backup, what should I do?
Cannot anybody can help me to solve this problem, since I am new on the TS3100...
If yu guys can help me, please give me some guideline to make this work. Thx..... :lol:
I am trying to connect TSM 5.2.3.3 to TS3100 tape library.
So I am define the following:
DEFINE STORAGE POOL:
define stgpool LTO_SP lto_dev1 maxsize=100G maxscratch=5
DEFINE DEVCLASS:
define devclass lto_dev1 devtype=lto library = ltolib1 format=ultrium3c mountlimit=180 mountretention=5 prefix=ADSM estcapacity=100G
DEFINE LIBRARY:
define library LTOLIB1 libtype=SCSI autolabel=no
DEFINE LIBRARY PATH:
define path FTAB03_SERVER1 LTOLIB1 srctype=server autodetect=yes desttype=library device=lb3.0.0.2
DEFINE DRIVE:
define drive LTOLIB1 LTO_DRV1 serial=autodetect element=autodetect
DEFINE DRIVE PATH:
define path FTAB03_SERVER1 LTO_DRV1 srctype=server autodetect=yes desttype=drive library=LTOLIB1 device=mt4.0.0.2
DEFINE VOLUME:
define volume LTO_SP VOL001 access=readwrite
After I configure the devices and define all the above things, then I perform the backup in the Backup client GUI. However, I got the following error:
"ANS5092S Server out of data storage space"
After that I check the activity log, I got the following errors:
"ANR8302E I/O error on drive LTO_DRV0 (mt4.0.0.2) with volume (OP=OFFL, Error Number=1, CC=0, KEY=05, ASC=53, ASCQ=02, SENSE=70.00.05.00.00.00.00.58.00.00.00.00.53.02.34.00.2C.19,Description=An undetermined error has occurred). Refer to Appendix D in the 'Messages' manual for recommended action.(SESSION: 277)"
"ANR8302E I/O error on drive LTO_DRV0 (mt4.0.0.2) with volume (OP=OFFL, Error Number=1, CC=0, KEY=05, ASC=53, ASCQ=02,
SENSE=70.00.05.00.00.00.00.58.00.00.00.00.53.02.34.00.2C.19,Description=An undetermined error has occurred). Refer to Appendix D in the 'Messages' manual for recommended action.(SESSION: 277)"
"ANR8358E Audit operation is required for library LTOLIB1.(SESSION: 277)"
"ANR1405W Scratch volume mount request denied - no scratch volume available.(SESSION: 277)"
My question is:
1. Why I cannot perform the backup?
2. Is that I forget to set something for this kind of Tape Library (TS3100)?
3. If I really want to perform the backup, what should I do?
Cannot anybody can help me to solve this problem, since I am new on the TS3100...
If yu guys can help me, please give me some guideline to make this work. Thx..... :lol: