Hi,
I've been trying to get this library to work for the past week but it's not really working yet the way I want it to. Not to mention that if I enable I/O Station i get I/O errors for just about any action. But that's not really important right now.
The problem i'm trying to solve right now is that it won't use scratch tapes when I try to migrate data from my primary stgpool to next tape pool.
One thing that I did notice is that, the tapes are really LTO3 but the barcodes are apparently LTO4. Could the problem be Media Type LTO-4? If I manually assign libvol to backuptape pool, it will migrate (eg: define vol backuptape BIC001L4).
Any ideas?
If more info is need, just let me know. Thanks for the help.
tsm> migrate stg backuppool lo=0
Act log says:
02/15/2012 11:08:30 ANR1100I Migration started for volume
/opt/tsm/pools/backup/0000018F.BFS, storage pool
BACKUPPOOL (process number 3). (SESSION: 1, PROCESS: 3)
02/15/2012 11:08:30 ANR1102I Removable volume /opt/tsm/pools/backup/0000018F.-
BFS is required for migration. (SESSION: 1, PROCESS: 3)
02/15/2012 11:08:30 ANR1102I Removable volume /opt/tsm/pools/backup/00000190.-
BFS is required for migration. (SESSION: 1, PROCESS: 3)
02/15/2012 11:08:30 ANR1405W Scratch volume mount request denied - no scratch
volume available. (SESSION: 1, PROCESS: 3)
02/15/2012 11:08:30 ANR1126E Migration is ended for volume
/opt/tsm/pools/backup/0000018F.BFS. There is insufficient
space in subordinate storage pools. (SESSION: 1, PROCESS:
3)
tsm>q drive f=d
Library Name: TS3100
Drive Name: DRIVE1
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2,ULTRIUMC,ULTRIUM
Write Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2
Element: 256
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 5000E11140891001
Serial Number: 1H10058862
Last Update by (administrator): TSMADMIN
Last Update Date/Time: 02/14/2012 19:17:49
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
tsm:>q libvol f=d
Library Name Volume Name Status Owner Last Use Home Device Cleanings Left Media Type
Element Type
------------ ----------- ---------------- ---------- --------- ------- ------ -------------- ----------------
TS3100 BIC001L4 Scratch 4,097 LTO LTO-4
TS3100 BIC002L4 Scratch 4,098 LTO LTO-4
TS3100 BIC003L4 Scratch 4,099 LTO LTO-4
TS3100 BIC004L4 Scratch 4,100 LTO LTO-4
TS3100 BIC005L4 Scratch 4,101 LTO LTO-4
TS3100 BIC006L4 Scratch 4,102 LTO LTO-4
TS3100 BIC007L4 Scratch 4,103 LTO LTO-4
TS3100 BIC008L4 Scratch 4,104 LTO LTO-4
TS3100 BIC009L4 Scratch 4,105 LTO LTO-4
TS3100 BIC010L4 Scratch 4,106 LTO LTO-4
TS3100 BIC011L4 Scratch 4,110 LTO LTO-4
TS3100 BIC012L4 Scratch 4,109 LTO LTO-4
TS3100 BIC013L4 Scratch 4,108 LTO LTO-4
TS3100 BIC014L4 Scratch 4,107 LTO LTO-4
TS3100 BIC015L4 Scratch 4,114 LTO LTO-4
TS3100 BIC016L4 Scratch 4,113 LTO LTO-4
TS3100 BIC017L4 Scratch 4,112 LTO LTO-4
TS3100 BIC018L4 Scratch 4,111 LTO LTO-4
TS3100 BIC019L4 Scratch 4,118 LTO LTO-4
TS3100 BIC020L4 Scratch 4,117 LTO LTO-4
TS3100 BIC021L4 Scratch 4,116 LTO LTO-4
TS3100 BIC022L4 Scratch 4,115 LTO LTO-4
I've been trying to get this library to work for the past week but it's not really working yet the way I want it to. Not to mention that if I enable I/O Station i get I/O errors for just about any action. But that's not really important right now.
The problem i'm trying to solve right now is that it won't use scratch tapes when I try to migrate data from my primary stgpool to next tape pool.
One thing that I did notice is that, the tapes are really LTO3 but the barcodes are apparently LTO4. Could the problem be Media Type LTO-4? If I manually assign libvol to backuptape pool, it will migrate (eg: define vol backuptape BIC001L4).
Any ideas?
If more info is need, just let me know. Thanks for the help.
tsm> migrate stg backuppool lo=0
Act log says:
02/15/2012 11:08:30 ANR1100I Migration started for volume
/opt/tsm/pools/backup/0000018F.BFS, storage pool
BACKUPPOOL (process number 3). (SESSION: 1, PROCESS: 3)
02/15/2012 11:08:30 ANR1102I Removable volume /opt/tsm/pools/backup/0000018F.-
BFS is required for migration. (SESSION: 1, PROCESS: 3)
02/15/2012 11:08:30 ANR1102I Removable volume /opt/tsm/pools/backup/00000190.-
BFS is required for migration. (SESSION: 1, PROCESS: 3)
02/15/2012 11:08:30 ANR1405W Scratch volume mount request denied - no scratch
volume available. (SESSION: 1, PROCESS: 3)
02/15/2012 11:08:30 ANR1126E Migration is ended for volume
/opt/tsm/pools/backup/0000018F.BFS. There is insufficient
space in subordinate storage pools. (SESSION: 1, PROCESS:
3)
tsm>q drive f=d
Library Name: TS3100
Drive Name: DRIVE1
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2,ULTRIUMC,ULTRIUM
Write Formats: ULTRIUM3C,ULTRIUM3,ULTRIUM2C,ULTRIUM2
Element: 256
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 5000E11140891001
Serial Number: 1H10058862
Last Update by (administrator): TSMADMIN
Last Update Date/Time: 02/14/2012 19:17:49
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
tsm:>q libvol f=d
Library Name Volume Name Status Owner Last Use Home Device Cleanings Left Media Type
Element Type
------------ ----------- ---------------- ---------- --------- ------- ------ -------------- ----------------
TS3100 BIC001L4 Scratch 4,097 LTO LTO-4
TS3100 BIC002L4 Scratch 4,098 LTO LTO-4
TS3100 BIC003L4 Scratch 4,099 LTO LTO-4
TS3100 BIC004L4 Scratch 4,100 LTO LTO-4
TS3100 BIC005L4 Scratch 4,101 LTO LTO-4
TS3100 BIC006L4 Scratch 4,102 LTO LTO-4
TS3100 BIC007L4 Scratch 4,103 LTO LTO-4
TS3100 BIC008L4 Scratch 4,104 LTO LTO-4
TS3100 BIC009L4 Scratch 4,105 LTO LTO-4
TS3100 BIC010L4 Scratch 4,106 LTO LTO-4
TS3100 BIC011L4 Scratch 4,110 LTO LTO-4
TS3100 BIC012L4 Scratch 4,109 LTO LTO-4
TS3100 BIC013L4 Scratch 4,108 LTO LTO-4
TS3100 BIC014L4 Scratch 4,107 LTO LTO-4
TS3100 BIC015L4 Scratch 4,114 LTO LTO-4
TS3100 BIC016L4 Scratch 4,113 LTO LTO-4
TS3100 BIC017L4 Scratch 4,112 LTO LTO-4
TS3100 BIC018L4 Scratch 4,111 LTO LTO-4
TS3100 BIC019L4 Scratch 4,118 LTO LTO-4
TS3100 BIC020L4 Scratch 4,117 LTO LTO-4
TS3100 BIC021L4 Scratch 4,116 LTO LTO-4
TS3100 BIC022L4 Scratch 4,115 LTO LTO-4