TS3500 - new Cartridges - audit/checkin

[bebopt]

Hi,
I have TSM 6.2.3.100 on AIX 6.1. TS3500 library has ALMS and virtual IO enable.
I insert 20 new cartridges into TS3500 that automatically assign to my virtual library.

In TSM then all drives are empty (no mount) and did commands:

audit library 3584LTO4 checklabel=barcode
Checkin libvolume 3584LTO4 search=yes status=scratch

But TSM didn't find any new volume ( i have read actlog and i search with "q libv" )

Why tsm don't recognize new cartridge ? And Why audit need that no volume has mount?

Thanks

 

[jbautista]

any outstanding request when you issue a "q req" command?

 

[bebopt]

any outstanding request when you issue a "q req" command?

No request is present.

This is the actlog:
ANR8788W Unable to read the barcode of cartridge in slot-id 1503 in library 3584LTO4; loading in drive to read label.
ANR8455E Volume RVW017LU could not be located during audit of library 3584LTO4. Volume has been removed from the library inventory.
ANR8461I AUDIT LIBRARY process for library 3584LTO4 completed successfully.
ANR0985I Process 96 for AUDIT LIBRARY running in the BACKGROUND completed with completion state SUCCESS at 16:08:27.

 

[Trident]

New tapes needs to be labeled.

label libvol 3584LTO4 search=yes checkin=scratch labelso=barcode

or

label libvol 3584LTO4 search=bulk status=scratch labelso=barcode

The last one needs a reply to a request.

 

[bebopt]

New tapes needs to be labeled.

label libvol 3584LTO4 search=yes checkin=scratch labelso=barcode

or

label libvol 3584LTO4 search=bulk status=scratch labelso=barcode

The last one needs a reply to a request.

Thanks a lot